Thank you for purchasing our company products. Please read these instructions carefully to enjoy optimum performance and a longer service life before you start to use. UNPACKING INSPECTIONS Unpacking instructions Please unpack the carton and check the goods carefully when you receive it , if discover packing damage, shortage or quality problem, please notify the shipper and reject the goods.
Safety Instructions Safety and regulatory power socket with high quality output should be used . Always connect the product to a grounded circuit to avoid the risk of electrocution. Never put tiny metal objects such as a screwdriver, iron wire and coins, etc. into the internal or stretch into the machine in case of short circuit .
Page 5
DMX Address – Set the DMX address Press the UP or DOWN button until “DMX address” is displayed, press ENTER. “X” will now be displayed, (“X” represents the displayed address). Press the UP or DOWN button to find the desired address. Press ENTER to confirm System Reset –...
Page 6
Back LCD – Back LCD Press the UP or DOWN button until “Black LCD” is displayed, press ENTER. Press the ON or OFF buttons to set your desired LCD mode. Show Mode – In this mode you can select your desired master mode Press the UP or DOWN button until “Show Mode”...
MAINTENANCE The unit should be cleaned periodically to ensure the optimum performance, the smudginess can decrease the life of light and the output of light is affected by the dust which can make the machine overheating. In general, make the maintenance at least two times a month. Be sure to power off the unit before cleaning .
0031546589299 Fax : 0031546589298 The Netherlands Product number: 150.527 Product Description: MHL-715WiSpot 7x 15W QUAD DMX 2.4Ghz Regulatory Requirement: EN 60598-1/-2-17 EN 55015 EN 61547 EN 61000-3-2/-3-3 EN 300 440-1/-2 The product meets the requirements stated in Directives 2006/95 and 2004/108/EC and 1999/5/EC and conforms to the above mentioned Declarations.