Jarv JRV-SBD1300 User Manual

Device Overview

Wristband
How to wear your Smart BT?
1
Wear Smart BT on your wrist
Wear the wristband with the screen facing up
3
Charge your Smart BT
To charge your Smart BT, plug the charging cable into a USB port and
attach the other end to the back of the Smart BT. A battery icon will
appear on the screen displaying the charging progress. Charging time
takes 2 hours
Note: The metallic contact might affect the battery charging capability
if it's covered by grease that comes from natural oil secretion of
human body or those moisturizing lotions you apply on skin. It is
suggested that you may try using some sort of mild detergent like
pharmaceutical alcohol to sterilize the metallic contact on the charger
before charging the device, but avoid corrosive chemical cleaners.
Button
Metallic contact for charging
Clasp
2
Fasten Smart BT with clasp
Squeeze both clasps into the holes on the wristband until you
hear a click, indicating the band is securely fastened.
4
Change the wristband
1
2
1. Spread open both bands with the screen facing up, and press down
the screen with your thumb until the core comes off the wristband.
Remove the clasp from the wristband as well.
2. Insert the core with screen facing down into the notch from the
inner side of wristband. Button up the clasp on the side of the band
with 2 holes. Please note that the charging contact should be near
the clasp.
User Manual
Core
EN