LG 42LV3700 Owner's Manual page 53

WPS (Wi-Fi Protected Setup)
If your router or AP has a WPS button, it is the
easiest connection method. You simply press the
button on the router and then select the WPS on
the TV within 120 seconds.
Repeat step 1-7 on "Connecting to a wireless
1
network".
Press the Navigation buttons to select the
2
Simple setting (WPS-button mode).
Press the WPS button on your router.
3
Go back to the TV and select Connect.
4
Repeat step 6-7 on "Connecting to a wired
5
network".
Ad-hoc Mode
Ad-hoc mode allows the TV to use a wireless to
connect to a computer without using a router or
access point.
Repeat step 1-5 on "Connecting to a wireless
1
network".
Press the Navigation buttons to select Setting
2
Ad-hoc network and press ENTER.
Press the Navigation buttons to select Enter
3
and press ENTER.
Press ENTER to select Connect to connect Ad-
4
hoc network.
- You can see the Network ID and Security Key
on your TV screen.
- Enter this Network ID and Security Key to
your device.
- When needed, you can change the setting
information using the Red button.
NOTE
When searching for wireless networks on
your PC using ad-hoc, the TV is named
LGTV10.
y y
LGTV10 that appears in the list. (Select
the same name as the network ID that
appears on your TV screen.)
Press the Navigation buttons to type in an IP
5
address and press ENTER.
Option
y y
Internet Protocol(TCP/IP) of
PC needs to be set manually.
IP address, Subnet Mask, and
default Gateway can be set with
PC Setting
your own discretion.
y
e.g.) IP address:
»
192.168.0.1 / Subnet Mask:
255.255.255.0 / default
Gateway: 192.168.0.10
y y
Verify IP address and gateway of
PC. Input Gateway address of PC
to IP Address, and IP Address of
PC to Gateway, and select Enter.
y
TV Setting
e.g.) IP address:
»
192.168.0.10 / Subnet Mask:
255.255.255.0 / default
Gateway: 192.168.0.1
Press the Navigation buttons to select Close
6
after Network setting is completed.
Press the ENTER.
7
53
ENTERTAINMENT
Description