Bissell Steamshot 39N7 SERIES User Manual page 5

Operati s
Filling the water
1. Push down on the safety cap while turning counter
clockwise.
2. Fill measuring cup to the max fill line.
3. Slowly pour water into steamer.
4. Replace the safety cap by pushingdown while
turning clockwise.
NOTE: You may substitute distilled or
demineralized water for tap water.
If your tap water contains a high level of mineral
content (hard water) the use of distilled or
demineralized water is recommended.
Do not add anything except cool water or you
will cause damage to the heating element and
void your warranty.
NOTE: Empty tank after each use.
Power cord
Unwrap power cord before operating unit.
Indicator light
The red indicator light will go on when the unit is first
plugged in. When the steamer is ready to use, the light
will turn off.
Steam trigger
Push to release steam.
Remove protective packaging from nozzle and
extension hose prior to use.
CAUTION
Always unplug your Steam Shot before
fi lling/refi lling. Press trigger until Steamer
depressurizes. Wait 5 minutes before
removing cap. Be sure to use an oven mitt in
case the cap is still hot.
1. 2.
3. 4.
CAUTION
Before disconnecting a tool from the steam
cleaner, make certain that steam is no
longer coming from the nozzle. Use an oven
mitt to remove tools, or wait until they cool
before removing.
1-800-263-2535 www.BISSELL.ca
5