Table of Contents
Advertisement
Answering Calls
1. Make sure your phone is on. If your phone is off, incoming
calls go to voicemail.
2. When a call comes in, answer the call by opening the phone
or by highlighting Answer and pressing
your settings, your PCS Phone notifies you of incoming calls
in the following ways:
The phone rings or vibrates.
The LED flashes.
The backlight illuminates.
The screen displays an incoming call message.
If available, the phone number of the caller is displayed.
If the phone number is in your Internal Phone Book, the
Phone Book entry's name is displayed.
The following options are also displayed. To select an option,
highlight it and press
Silence Ringer to mute the ringer.
Ignore to send the call to your voicemail box.
Depending on your settings, you may also answer incoming calls
by pressing any digit. (To answer a call when you are roaming
and Call Guard is enabled, you will be prompted to select Answer
to answer the call. See "Call Guard" on page 46.)
Note: If your phone is off, incoming calls go to voicemail.
3. To disconnect the call, close the phone or press
Missed Call Notification
When an incoming call is not answered, the Missed Call log is
displayed on your screen.
To display the Missed Call entry:
Highlight the entry and press
number, highlight Call and press
Section 2: Understanding Your PCS Phone
18 2A: Your PCS Phone - The Basics
.
. (To dial the phone
. Depending on
.)
.
Advertisement
Table of Contents
