Clear View Audio clio Owner's Manual

Meet
Clio
Power & Volume
Power Port
Plug in power cord.
l
1~1
•
Connect via Wire
Reconnecting via Bluetooth
Wired Input
Plug in a 3.5 mm
audio cable.
Anytime: Go to Bluetooth settings on your device and select "Clio".
Standby Mode (solid white light}: Push any button on Clio to reconnect.
Volume
Mute
Connect via Bluetooth (first time)
Blinking Blue
Clio ® is ready to pair.
Look for "Clio" on
your Bluetooth ® device.
Source Selection
Switch between Bluetooth
and wired connection.
On Initial Pairing
You will hear a tri-tone
beep and the flashing LED
turns to solid blue.
Solid Red
Clio is in wired mode.
First-time Pairing of Additional Bluetooth Devices
Push and hold
[f)
until light blinks blue. Then go to Bluetooth settings
on your device and select "Clio".