Connections To Your Tv; Component Video Connection - LG HT355SD-A2 Owner's Manual

Speaker Positioning
A
F
A
A
D
NOTE
If the picture on nearby TV sets becomes
magnetically distorted, keep the speaker away
from your TV
Connections to Your
TV
Make one of the following connections,
depending on the capabilities of your existing
equipment.
NOTE
• Depending on your TV and other equipment
you wish to connect, there are various ways you
could connect the player. Use only one of the
connections described in this manual.
• Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make
the best connections.
HT355SD-A2_DPANLLK_ENG_4769.indd13 13
B
C
G
A
A
E
A
CAUTION
• Make sure the unit is connected directly to
the TV. Tune the TV to the correct video input
channel.
• Do not connect your unit via your VCR. The
image could be distorted by the copy

Component Video Connection

Connect the COMPONENT VIDEO
(PROGRESSIVE SCAN) OUTPUT jacks on the unit
to the corresponding input jacks on the TV
using Y Pb Pr cables.
You can hear the sound through the system's
speakers.
Component Video Connection
NOTE
If your TV accepts progressive format signals, you
must use this connection and set [Progressive
Scan] in [Display] setup to [On] (See page 17).
Installation 1
3
2010-04-05 ¿ÀÈÄ 2:44:51