Microphone Mounting; Low Battery Indicator - Usl MMP-10 Instruction Manual

MMP-10 I
Mounting the Microphone

Microphone mounting:

Mount the microphone to the
telescoping stand as shown
(Figure 2) and place the stands
in the desired locations
(Figure 3) in the theater or
other venue.
Microphone
Telescoping
Stand

Low Battery Indicator

Low battery voltage can cause the unit to not switch properly,
and may cause measurement errors. To avoid this, the MMP-10
incorporates a low battery sensing circuit. When the battery
voltage drops too low, the unit will reset to microphone one, and
the red LED will blink. Replace the battery with a standard 9V
alkaline battery.
M
NSTRUCTION ANUAL
Telescoping Stand
Seat Mounting
Figure 3
U
LTRA
Clip
Figure 2
- 9 -
S L , I .
TEREO ABS NC
Microphone