How To Setup/Connect Your Hardware - TP-Link TL- WR740N User Manual


RESET: There are two ways to reset to the Router's factory defaults.
1) Use the Factory Defaults function on System Tools -> Factory Defaults page in the
Router's Web-based Utility.
2) Use the Factory Default Reset button: Press the Reset button for five seconds and then
wait for the Router to reboot.

POWER: The Power socket is where you will connect the power adapter. Please use the
power adapter provided with this TL-WR740N/TL-WR741ND 150Mbps Wireless N
Router.

ON/OFF: The switch for the power.

1,2,3,4 (LAN): These ports (1, 2, 3, 4) connect the Router to the local PC(s).

WAN: This WAN port is where you will connect the
Ethernet.

Wireless antenna: To receive and transmit the wireless

QSS: If you have client devices, such as wireless
Wi-Fi Protected Setup, then you can press this button to
connection between the Router and client devices and
configure wireless security for your wireless network.

How to setup/connect your hardware

DSL/cable Modem, or
data.
adapters, that support
quickly establish a
automatically