Selecting Camera Modes; Capturing Video And Photos; Time Lapse Settings - GoPro HERO Quick Start Manual

/ Selecting Camera Modes

Turn the camera on and repeatedly press the Power/Mode button to cycle
through camera modes.
VIDEO PHOTO
Record video. Capture a single
photo.
TIME LAPSE
SETTINGS
Capture a
Adjust camera
series of photos
settings.
at half-second
intervals.
BURST
Capture a burst
of 10 photos in 2
seconds (5 fps).

/ Capturing Video and Photos

Press the Power/Mode button repeatedly to cycle to the mode you
want, then press the Shutter/Select button to start/stop recording or
take a photo.
QUIKCAPTURE
When the camera is off and
QuikCapture is enabled, you can
turn the camera on and immediately
begin capturing video or Time Lapse
photos just by pressing the Shutter/
Select button. Press once for video,
press and hold for two seconds
for Time Lapse photos. Press
again to stop recording and power
off the camera.
You can change the QuikCapture
setting in Setup mode. For
details, see the User Manual
at gopro.com/support.