Nokia 2128i User Manual page 51

Bravo_R210_Verizon_080205.fm Page 53 Monday, August 8, 2005 8:59 AM
Default profile—Choose the profile you wish to be automatically activated when
a headset is connected.
Automatic answer—Answer calls automatically after one ring when a headset is
connected. Select On or Off.
Handsfree
Scroll to and select an option, to enter the submenu and modify its settings.
Default profile—Select the profile to automatically activate when your device is
connected to a car kit. See also "Customize a profile," p. 43.
Automatic answer—Set so calls are answered automatically after one ring when
a car kit is connected. Select
Lights—Choose to keep the device lights always on, or to shut off automatically
after several seconds. Select
Loopset
The loopset (for use with T-coil equipped hearing aids) is recommended for use
with your device. Scroll to and select the option of your choice, to enter the
submenu and select Use loopset
TTY/TDD
Select Yes or No to use TTY/TDD. Check with the manufacturer of the TTY/TDD
device for a connecting cable that is compatible with the Nokia device. TTY/TDD
communications depend on network availability. Check with your service
provider for availability and description of services.
Set up the TTY/TDD profile
To connect your device directly to the TTY/TDD device, set up the TTY/TDD profile.
1. Connect the HDA-10 headset adapter to the connector on the bottom of the
device.
2. Connect one end of the cable to the TTY/TDD device.
3. Insert the other end of the cable into the headset jack on the HDA-10 headset
adapter.
4. In the standby mode, select
TDD > Use TTY > Yes.
On or Off.
On or Automatic.
> Yes or No to modify the settings.
Menu > Settings > Enhancement settings
S e t t i n g s
> TTY/
53