Set The Time And Date; Time Mode - Celestron TrekGuide 48004 Instruction Manual

set up
power
• Use a small screwdriver to remove
the 2 screws on the battery cover.
Insert CR2032 lithium batteries
(2 qnty) with the positive side of the
battery upward. Replace the battery
door and tighten the screws.

set the tIMe anD Date

• Press MODE button to switch between Clock, Alarm Clock, Year and Dual
time.

tIMe MoDe

time setting
• Press and hold "MODE" button for
3 seconds to enter settings. Press
"▼"or "▲" to change setting, and
press "MODE" button to confirm
and move to next setting.
• Setting sequence is as follows:
Hour, Minute, second, Year, Month,
Day, Day-of-week language
(German, english,
I ENGLISH
4
• When the battery is low
appear on screen and the batteries
should be replaced.
russian, danish, dutch, Italian,
spanish or French)
• If no button is pressed for 15
seconds, the display will return to
previous mode.
• Press "MODE" button to exit the
time setting Mode.
NOTE: When out of settings mode, press the "
to select 12 or 24 hour mode
will
( )
▲ " button