Bang & Olufsen BeoSystem 3 Manual page 53

Set speaker distance
Enter the straight-line distances in metres
between your favourite viewing position and the
individual speakers.
Calibrate the sound level
A calibration sound is produced alternately in each
speaker. Adjust the speakers to match the centre
speaker's sound level.
See active sound system
See the name of the active sound system for a
source or programme on the screen.
Speaker level Calibrate each speaker in reference to the centre speaker to ensure an optimal
surround sound.
If your setup includes two different viewing positions, a Home cinema setup and a
regular TV viewing setup, you must make two different loudspeaker settings.
Select 'SPEAKER
Select speaker and select distance
DISTANCE' menu
Select 'AUTOMATIC'
Select 'SPEAKER LEVEL'
or 'MANUAL' in
menu
'SEQUENCE'
Bring up 'TV SETUP' Select 'SOUND' in
menu 'OPTIONS' menu
LEFT RIGHT
CENTRE
FRONT FRONT
LEFT
SURROUND SURROUND
LEFT RIGHT
BACK BACK
Set speaker distance.
If 'MANUAL' is
selected, select
speaker and adjust
level
Select 'SOUND SYSTEM' menu
RIGHT
Calibrate sound level from two different viewing
positions.
NOTE! Once you have performed the speaker
calibration, you will only need to re-calibrate the
speaker sound if you make changes to the setup.
51
Accept
Accept
1
2