Panasonic CQ-DF802U Operating Instructions Manual page 59

The security indicator will blink.
Swi~tch off the power of the unit.
Remove the removable face plate. (&x3 page 58)
Gently press the bottom of the case and open
the cover. Place the face plate into the case and
take ii: with you when you leave the car.
sure to keep the front panel with the removable ,face plate case (included) when it has been detached
from the main unit.
o Take care not to drop
the
front panel when it has been detached from the main unit. Also take care not to
bump the top surface of the touch panel into anything. If you do so, you may break the glass on the top sur-
face of the touch panel.
Slide the left side of the removable face plate in
place.
Press the right end of removable ,face plate until
"click" is heard.
The security indicator blinks when the removable
.face plate is removed from the unit.
Active the security function in the function settings.
(i- page 44)
This alarm sounds to warn you not to forget to re-
move the panel before leaving your car. This func-
,tion is activated when the security indicator is on.
P---- --.-
I
Security indicator
-.-- ---- ---
\
ace plate is not waterproof. Do not expose it to water or excessive moisture,
Do not remove the face plate while driving your car.
Da flat place the face plate on the dashboard or nearby areas where the temperature rises to high I@&
63 Do not touch the cantacts on the face plate or on the main unit, since this may result in~poor eJe@ri~al
.
@ If dirt or other foreign substances get on the contacts, wipe them off with clean and dry cloth.
$3 To avoid damaging the front panel, do not push it down or place objects on it while it is open.
_ ""_~~. ..- . ..-