Denon Envaya DSB200BK Quick Start Manual page 3

POLSKI
4. Playing Music from your Bluetooth Device
(Pairing and Connecting)
Activate the Bluetooth settings on you mobile phone.
q
Select "Envaya" from the list of available Bluetooth
w
devices.
In a few seconds you will hear a fast 3 note tone from
the speaker indicating that it is connected to your device.
The Bluetooth button remains illuminated.
Envaya
Play music using any app on your device.
e
The sound will now play from the Envaya wireless
speaker.
РУССКИЙ
SVENSKA
Bluetooth ON
NEDERLANDS ESPAÑOL
Basic Troubleshooting
Speaker does not turn on
• To turn on the speaker press and hold the power button for 2 seconds.
• The battery is completely discharged. Connect the AC adapter and recharge
the battery.
Cannot pair a Bluetooth device with the speaker
• The Bluetooth device is malfunctioning. Power cycle the device, remove the
pairing information and re-pair the speaker to the device.
• This speaker cannot be paired with a 4th device when it is connected
simultaneously to 3 Bluetooth devices. Disconnect one of the connected
Bluetooth devices before pairing another device.
Speaker is turning o automatically
• No audio is played via Bluetooth for approximately 15 minutes. Power on
the speaker by pressing and holding the power button for 2 seconds.
Speaker is malfunctioning
• The speaker needs to be reset. Using a small paper clip, press and release
the reset button located on the side of the speaker.
• The speaker needs to be reset to the factory default settings. Turn on the
speaker. Press and hold the POWER and VOLUME + buttons together for
approximately 4 seconds. The status indicator will blink 4 times to indicate a
reset. (Note : All pairing information from Bluetooth devices will be erased.)
For more information, please visit www.denon.com
to view the complete Owner's Manual for the Envaya
wireless speaker.
ITALIANO FRANÇAIS DEUTSCH ENGLISH
2