EQUIPMENT CARE
Never push the equipment beyond its design
limits. If it will not do what you want with reasonable
ease and speed, assume you have the wrong size or type
of carpet cleaner for the job. Contact your local HSS Hire
Shop for advice.
Never fill a carpet cleaner with water that' s hotter
than your hand can bear.
Use only cleaning products supplied by HSS and
follow the instructions on the containers (and the
machine) for details regarding their use.
Keep the equipment clean, you will find this less of a
chore if you clean it regularly, rather than wait until the
end of the hire period.
Handle the equipment with care. Avoid dropping it,
knocking it, or otherwise exposing it to damage.
When not in use, store the equipment somewhere
clean, dry and safe from thieves. Protect this
equipment from frost and freezing temperatures.
FINISHING OFF
Switch OFF the brush head and spray pump.
Disconnect
spray
connection
(see illustration) from
the
clean
tank solution outlet
and fit one end of
the small drain hose
(clipped to the rear of
the
unit)
to
solution outlet and
put the other in the
Spray
Drain
waste tank.
Connection
Hose
You can now empty
the clean water tank by setting the spray pump
switch to ON.
Once empty, switch OFF the spray pump. You can
now unplug the machine.
Disconnect the drain hose and reattach to the rear
of the unit then reconnect the spray connection to
the clean water tank solution outlet.
Next, remove the machine' s plastic cover, empty and
rinse out the waste tank, then re-assemble the
machine ready for return to your local HSS Hire Shop.
the
water
the
Contact your local
0845 728 2828
...any comments?
If you have any suggestions to enable us to improve
the information within this guide please fax your
comments or write to the Product Manager at the
address below
Fax: 020 8687 5001
©HSS Hire Service Group Plc 2000 No. 918/01
Group Office: 25 Willow Lane, Mitcham, Surrey CR4 4TS
Web Site: http://www.hss.co.uk
Operating & Safety Guide 918
Hire Shops
Powered
Carpet Cleaner
A medium-sized machine with
built-in brush.
Code 58322
Need help?
Do you have a question about the Hire Shops 918 and is the answer not in the manual?
Questions and answers