Specifications - Phil Jones Bass PB-300 Owner's Manual

TRANSPORTING AND STORING THE PB-300
When transporting in a vehicle, it is recommended that you use an external case or heavy-duty
cover to prevent it being damaged by falling over or other objects falling on it.
When Storing:
• Keep in a dry location preferably at room temperature.
• Do not store in temperatures below -20 Degrees C or above 40 Degrees C.
• Do not allow it to get wet. If this occurs, never turn it on in this condition.
• Do not leave the PB-300 permanently connected to a power source.
Speaker
Computer Optimized Vented Enclosure
Speaker Frequency Response: 40Hz –15KHz
Speaker Compliment: 6 x 5inch proprietary, extended-range drivers
Speaker Sensitivity: 94dB/W/M
Internal Speaker Impedance: 6 Ohm
Dimensions(HxWxD): 24.2 x 12.6 x 16.1 inch
Weight: 37.5 lbs.
Amplifier
PJB 250watt, class A/B amplifier with digital switch mode power supply.
Frequency Response
Line input: 40Hz -120KHz
Low Cut Filter: 24dB/Octave at 40Hz.
Maximum Output Power
250 watts RMS
Signal to Noise Ratio
Better than 98 dB
Impedance
Line Input: >75KΩ
Included Parts
12 ft AC Power Cord, 6 ft AC Power Cord, 6 ft signal cable, soft cover, manual, warrantee
card etc.

SPECIFICATIONS