Related Manuals for Love N Care Bumps
Summary of Contents for Love N Care Bumps
- Page 1 Instruction Manual “Bumps” Folding Walker IMPORTANT: PLEASE READ INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE! ITEM : B P 8 6 7 7...
-
Page 2: Important Safety Information
WARNING IMPORTANT! PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE Read all instructions before assembly and use of this walker. Keep instructions for future use. The child may be hurt if you do not follow these instructions. IMPORTANT SAFETY INFORMATION How to keep your child safe while using this product. NEVER LEAVE CHILD UNATTENDED. - Page 3 PART S Seat Pad x1 Walker Unit x1 Seat Back x1 Front Casters x2 Rear Wheels x2 Nuts x2 Axles x2 BUMPS MODEL ONLY / Plush Arch Toy x1 Music Tray x1 TOOL NEEDED: Phillips Screwdriver...
- Page 4 PART S/ BUMPS+ MODEL ONLY BUMPS+2 MODEL ONLY Music Insert x1 Music Tray x1 Arch Toy x1 Music Insert Toys x2 BUMPS+3 MODEL ONLY Spinner Toys x2 Nuts x2 M3 Bolt x2 TOOL NEEDED: Phillips Screwdriver...
- Page 5 1. Flip base over to expose underside. 2. Insert the stem of one of the front casters into the hole in one of the front corners. snaps (locks) into place. Pull up on caster to make sure it is locked in place. 4.Repeat for the other caster.
- Page 6 1. Locate rear wheel opening in base of the walker. Insert one rear wheel as shown. 2. Align holes of wheel with corresponding axle holes on the base of the walker. Plastic expose the axle hole. 3. Slide metal axle into holes until the head of it passes the plastic tab and clicks into place.
- Page 7 1. The walker is in the folded position when removed from the box. 2. To unfold walker, pull up on the tray. Raise upward until the vertical leg tabs lock into the base. 3. Rotate top tray forward. 4. Insert the front leg into the slot in the base.
- Page 8 1. Push crotch portion of seat pad inside out to form seat, so that the fabric is on inside of seat pad. 2. Place seat pad into seat ring located on tray. Align it so that high back support aligns with back of seat ring.
- Page 9 To raise the height of the seat: Grip the buckle on the rear of the seat pad. Pull the loose end of the webbing away from the buckle until the correct heigh is achieved. You may need to place the child in the seat several times before the correct height is achieved.
- Page 10 BUMPS MODEL ONLY Before tting the music insert you will need to t the batteries. Unfasten the screw in the battery cover using a X-head screwdriver. Insert two ‘AA’ batteries, ensure that the batteries are tted the correct way round.
- Page 11 Slot the plush arch toy into the round holes on the main tray, see diagram. Make sure both lock hooks snap into the lock hook holes. Slot the music tray as shown in the diagram. From the underside of the tray, screw the two nuts onto the protrud- ing ends of the music tray.
- Page 12 BUMPS+ MODEL ONLY Befor will need to fit the batteries. Unfasten the screw in the battery cover using a X-head screwdriver. Insert two ‘ A A’ batteries, ensure that the batteries ar correct way round. ry cover and tighten the screw.
- Page 13 Slot the two music insert toys into the holes in the ends of the music insert. Slot the music insert as shown in the diagram. From the underside of the tray, screw the two nuts onto the protruding ends of the music insert toys.
- Page 14 BUMPS+2 MODEL ONLY Before tting the music insert you will need to t the batteries. Unfasten the screw in the battery cover using a X-head screwdriver. Insert two ‘AA’ batteries, ensure that the batteries are tted the correct way round.
- Page 15 Slot the plush arch toy into the round holes on the main tray, see diagram. Make sure both lock hooks snap into the lock hook holes. Slot the music tray as shown in the diagram. From the underside of the tray, screw the two nuts onto the protrud- ing ends of the music tray.
- Page 16 BUMPS+3 MODEL ONLY Position the two spinner toys into the round holes on the tray, see diagram. Push the spinner toys into the holes until the studs on the ends of the spinner toys lock over the housings on the underside...
- Page 17 THE WALKER FOLDS EASILY FOR TRAVEL & STORAGE. 1. Remove electronic toys from the tray. 2. Release the front leg from the base by pressing the leg release button and front leg. 3. Fold the front leg under the tray until it locks onto the tray itself.
- Page 18 NOTE: To maintain stopping performance, clean friction strips regularly with damp cloth. Care & maintenance 1. Wipe plastic parts with a damp cloth using mild soap. 2. Machine wash seat pad in cold water in gentle cycle. Do not use harsh detergents or bleach. Do not dry clean.
- Page 19 Contact Us: Love N Care Pty Ltd. 297-299 Canterbury Rd, Revesby NSW 2212 Australia Contact No: 02 9774 4655 Fax: 02 9774 4633 Email: info@lovencare.com.au Website: www.lovencare.com.au...