General; General Controls - Revox B225 Maintenance Instructions Manual

R ^ / a x
B225
1 .
1.1
G E N E R A L
I n d e x of CD p l a y e r c o n t r o l s
1.1.1
General controls
1 Ij POWER *
[ 2 j LOAD
[ 3 J STOP *
[ 4 J PLAY/NEXT
H5"f REPEAT
[6j (CD drive)
[7j (Display)
[8j (keys 0-9)
Key for switching the CD player ON and
OFF. However, certain assemblies (such
as the IR receiver) remain always switched"
on (in so-called standby m o d e ) .
The drawer with the player mechanism
[6j opens or closes when this key is
pressed.
Interrupts the player function. The
optical laser head is retracted to the
starting position and the program is
cancelled if the CD player was in program
m o d e . The position in which the laser
pickup was operating before STOP was
pressed cannot be reproduced. If this
is desired, please refer to tJL (PAUSE)
key.
Play key with the following functions;
If pressed after LOAD [ 2 j , the CD starts
to rotate, the content list is read, and
the disc is played starting at the first
selection (TRACK). The next selection
(TRACK) is accessed when this key is
pressed again.
If pressed after PROGRAM MODE [26 J has
been selected: play program mode is
activated.
The selection currf.r^ly being played
is repeated immediately when this key
is pressed. If the CD player is in STOP
m o d e , the first selection of the compact
disc will be played. If the CD player is
in program mode, the current program step
will be repeated.
Drawer module with CD player mechanism
and liquid-crystal display. The drawer
can be opened or closed with LOAD [ 2 ] .
Multifunction LC display 'which provides
information on all operating modes of
the CD player and the content of the
loaded compact disc.
Digit keys for direct addressing of
a selection (TRACK) in conjunction with
PLAY/NEXT [ 4 j , or for programming.
The CD player can be switched on by pressing any of
the controls [ Ij through [8j of the upper row (except
REPEAT [5j and the digit key 0 ) . The CD player starts
in the selected operating mode.