Page 1
DJ SCRATCH MIXER MODEL: JDJ-500 USER MANUAL PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
GENERAL SAFETY INSTRUCTION READ ALL INSTRUCTIONS BEFORE USE Always follow basic safety precautions when using electrical products, especially when children are present. Congratulations on your purchase of this DJ Scratch Mixer. To get the most from your speaker system, please take a few minutes to read these instructions. WARNING - To reduce the risk of fire, electric shock or serious personal injury.
Page 3
Do not expose the product to temperatures above 104°F (40°C). Keep it in moderate climates. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed near the product. Dry location use only.
COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The serial number of this product is found on its bottom. You should note the serial number of this unit in the space provided as a permanent record of your purchase to aid in identification in the event of theft of loss. Model Number: JDJ-500 Serial Number: ____________________ - 4 -...
GETTING STARTED Standard Accessories Unpack the unit carefully and remove all the accessories from the giftbox. Please keep the box and packing materials, in case you wish to store the unit. Don’t remove any labels or sticker on the rear of the unit and adaptor. Before setting up the unit, verify that the following accessories are present: Main unit x 1 AC adaptor x 1...
Page 7
Connection Diagram AC adaptor Before operating this appliance you have to: a. Connect the appliance with your iPod or iPhone using the supplied Audio cables. b. Connect to the external audio system via the supplied RCA cable or 3.5mm Audio cable. c.
Page 8
4. Connect your iPod or iPhone to the DJ Scratch Mixer as shown below: iPod Connection Insert the short 3.5mm cable through the hole at back of cradle making sure the3.5mm jack is inserted as shown in the drawing. Insert the 3.5mm jack through the bracket and connect to the headphone jack of the iPod.
Page 9
iPhone Connection Remove 3.5mm cable from bracket. Connect the 3.5mm cable to the 3.5mm headphone jack on top of the iPhone. Connect the iPhone to the Deck via the 3.5mm Aux 1 jack. Put iPhone with bracket into the cradle. Auxiliary Audio Device Connection Connect the 3.5mm cable to the 3.5mm headphone jack on the MP3 player or auxiliary Audio Device.
Page 10
MAIN FEATURES AND BASIC OPERATION - 9 -...
Page 11
POWER BUTTON: TURN ON/OFF THE UNIT Press the power button on the main unit to turn the unit on. The power indicator LED next to the power button turns on. Press the power button again to switch the unit off. The power indicator LED then turns off.
Page 12
Press and hold the “DIGI CUE” and press “SHIFT” simultaneously to select one of three special digital sound effects. 15. SHIFT/STOP When a Beat effect is activated press the STOP button to stop the effect. Press the “DRUMS CUE” or “DIGI CUE” button and press “SHIFT” to switch between effects.
Page 13
affecting what is playing through the speakers. Headphone volume can be controlled via the Cue control. Microphone: (Not included) The Mixer allows you to connect a microphone in order to add your own voice to the mix. Note: Please use a headset mic with 3.5mm stereo plugs for both mic and headphone inputs...
SPECTRA GREEN NOTICE At Spectra, environmental and social responsibility is a core value of our business. We are dedicated to continuous implementation responsible initiatives with an aim to conserve maintain environment through responsible recycling. Please visit us http://www.spectraintl.com/green.htm for more information on Spectra’s green initiatives or to find a recycler in your area.
Page 15
The 3.5 mm audio cable plug is Clean the cable plug and dirty. reconnect. Adjust the master output level The Master Level Output has been control by using the Main set too low. Control. Sound is Adjust the master output level distorted.
Page 16
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. TO OBTAIN SERVICE, please remove all batteries (if any) and pack the unit carefully and send it prepaid by insured parcel post or UPS to SPECTRA at the address shown below.
Need help?
Do you have a question about the JDJ-500 and is the answer not in the manual?
Questions and answers