Table of Contents
Advertisement
HS33S_A2P.BSGPLLK_ENG_2858
Making system connections
Connecting the video out to your TV.
Check the jacks of your TV, and choose the
Picture quality improves in order from
B
To connect to a TV with the video in jack
A
Connect the video cable from the VIDEO OUT on the rear of the active
subwoofer to the video in jack on your TV.
B
To connect to a TV with the component video in jacks
If your TV has component video in, connect a component video cable from
COMPONENT VIDEO OUT (Y, P
to the component video in jacks on your TV.
Downloaded From TheatreSystem-Manual.com Manuals
3/4/09
2:05 PM
Page 7
A
B
C
,
, or
connection.
A
to
C
.
C
A
and P
) jacks on the rear of the main unit
B
R
C
To connect to a TV with the HDMI jack
Connect the HDMI cable from the HDMI OUT jack on the rear of the main
unit to the HDMI IN jack on your TV.
• If your TV does not accept your resolution setting, abnormal picture
appears on the screen.
• Use the HDMI Cable within 5 meters.
• If the volume bar is not displayed on TV screen, when you select Simplink
to off on TV, restart the unit.
Available resolution according to connection
[HDMI OUT] : Auto, 1080p, 1080i, 720p and 480p (or 576p)
[COMPONENT VIDEO OUT] : 480p (or 576p) and 480i (or 576i)
[VIDEO OUT] : 480i (or 576i)
Listening to the sound from
your analog component
Analog signal components such as VCR and TV.
1 Connect the audio out of your analog component
to the AUX IN (AUDIO L/R) on the rear of the
active subwoofer:
2 Select the AUX function:
ON REMOTE
-
INPUT
7
Advertisement
Table of Contents
