Welcome to BEK SpyderProtect! This quick start guide is designed to give you a basic overview of the system,
and help you get the most out of your home automation, monitoring, and alerts experience. For more detailed infor-
mation regarding your SpyderProtect system, please refer to your BEK SpyderProtect Manual.
Note Initial Login: After logging in with your credentials at www.bekprotect.com, you will be able to change your
password. Your new password must be eight characters, contain one letter, and one number. It cannot contain
your username.
SYSTEM COMPONENTS
Your SpyderProtect system is comprised of several components:
Gateway
The gateway (Figure 1) consists of the gateway controller, a 4-way
USB hub, and a Z-wave wireless radio. Please note, it is important to
keep the wireless hub in the connection chain between the gateway.
Also do not change the port of the wireless dongle on the hub.
Sensors
SpyderProtect sensors come in various formats and sizes. For example, sensors are available for detecting
temperature, the presence of water, an open door/window or motion. Additionally, special purpose sensors
such as thermostats and cameras are also available. SpyderProtect sensors are designed to be controlled and
monitored from your smartphone (or web-enabled device).
Repeater
In some cases, a repeater will be necessary to boost the Z-Wave signal in your home. Certain Z-Wave
repeaters can doubles as an AC on/off switch. Unplugging a repeater may render the system inoperable,
so it is important to keep all repeaters plugged in (even when not in use).
Your SpyderProtect installer will install the SpyderProtect System to the specifications you provide.
Please note that last minute change orders may incur additional fees. Once your system has been set-up,
the SpyderProtect installer will show you the basics of using your new system. Please refer to the
SpyderProtect Manual for detailed instructions on how to use and automate your system.
1-701-475-2361 1-888-475-2361
www.bekspyder.com
Figure 1
Form1214