Before You Start; General Information - Valence RT User Manual

3. B Y S
EFORE OU
Please read all the safety information provided in this document prior to installing and/or
operating the battery.
®
The U-Charge RT power system should be professionally installed and handled. Please contact
Valence Customer Support for free consultation if you have any questions about the handling,
operation and safe use of this battery before proceeding further.
CAUTION: Performing any of the following actions will immediately void your
warranty on the product and could lead to a potentially dangerous situation.
1. Breaking the lid and exposing the circuit boards and battery assemblies.
2. Puncturing or otherwise physically damaging the battery casing, circuit boards, battery
cells or any other part of the battery mechanism.
3. Operating the battery in an environment where the temperature is higher than 60°C
(140°F).
If you believe that in the course of using the U-Charge
of the above listed conditions or any other safety precautions listed in this manual, please DO
NOT proceed any further and contact Valence Technology immediately for guidance and
information.

3.1 General information

Please inspect each battery carefully. Report any damage from shipping to Valence Technology,
Inc. immediately.
Verify in advance that the U-Charge
®
U-Charge RT Series batteries are designed for 12, 24, 36 or 48 Volt systems. Do not use if
your system requires more than 4 batteries connected in series. The U-BDI is required for
systems that are 24-48V for proper inter-module balancing. The U-Charge
can be charged by most lead acid chargers set for Gel/AGM setting.
Recommended
Charge
Voltage
Max allowed
Charge before
auto
disconnect
12303 Technology Blvd., Suite 950, Austin, TX 78727, USA
Phone (888) VALENCE or +1 (512) 527-2900, Fax +1 (512) 527-2910
Unit 63 Mallusk Enterprise Park, Mallusk Drive, Newtownabbey, UK
Phone +44(0) 28 9084 5400, Fax +44(0)28 9083 8912
Email: sales@valence.com, Web site:
TART
®
RT power system fits your specific requirements.
12 Volt System 24 Volt System
14.6 Volts 29.2 Volts
15.2 Volts 30.4 Volts
www.valence.com
® power system, you will conflict with any
36 Volt System
43.8 Volts
45.6 Volts
Performance may vary depending on, but not limited to cell usage and application.
If cell is used outside specifications, performance will diminish. All specifications
are subject to change without notice. All information provided herein is believed,
but not guaranteed, to be current and accurate. Copyright © 2005-2008 Valence
Technology, Inc.
®
RT power system
48 Volt System
58.4 Volts
60.8 Volts
Revision Date October 2008