Summary of Contents for picoBoo FI-105
- Page 1 FI-105 OPERATING MANUAL (Revised Oct 23, 2009) 6 Oakside Court Barrie, Ontario L4N 5V5 Tel: 905-803-9274 Fax: 647-439-1470 www.frightideas.com...
- Page 2 Do not turn up the source volume so your speakers are really loud! Use this sound only as a guide so you know when to start and stop recording. Once the sound is recorded and the picoBoo plays it back it will be much louder than it is now.
- Page 3 The picoBoos are designed to work with low-voltage sensors only, DO NOT use typical outdoor motion sensors. In order for the picoBoo to be able to read your trigger properly you must set the contact type. If your trigger is normally-open then you can skip this step as it’s the default setting.
-
Page 4: Troubleshooting
You can do this to one or both of your outputs by setting them to normally-closed.