Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Optoelectronics HBB056
- Page 1 HBB056 Mobile Power Bank User Guide...
-
Page 2: Table Of Contents
Contents Safety Instructions Specification Overview Connection Charging the Battery... -
Page 3: Safety Instructions
HBB056 User Guide Safety Instructions <Usage/Storage> 1. Please read the instructions below and the label on its surface before use. Do not use this battery to power other devices. We do not guarantee and are not responsible for the safety of powering the devices other than our projector. - Page 4 HBB056 User Guide 11. When the battery emits any liquid, do not touch the liquid directly by your hands. Contact your dealer and do not repair the battery by yourself. If the liquid happens to contact your eyes or skin, do not rob your eyes or skin but rinse them with clean water immediately, and then go to the hospital for further treatments.
-
Page 5: Specification
HBB056 User Guide Specification HBB056/Battery Pack for HBP200 Series Model Name Spec Lithium Ion Battery Pack Input 19V/2A Output DC: 9-12.6V/2.5A USB: 5V/2A Capacity 5200mAh/11.1V 0℃~45℃ Ambient Charge Temperature -20℃~60℃ Conditions Discharge Temperature Humidity 65℃±20% Overcharged 13.05±0.025 V Detection Voltage Overdischarged 6.9±0.05 V... -
Page 6: Overview
HBB056 User Guide Overview ① ② ③ ④ ① Screw (for fastening the projector) ⑤ ② DC in ③ USB port 5V/2A ④ DC Plug (for connecting the projector) ⑤ Indicator... -
Page 7: Connection
HBB056 User Guide Connection The battery is fully charged and ready to use when you receive the battery. (To extend the useful life of the Battery, before you recharge it the first time, run the Pico Projector to a complete discharge of the battery, then recharge it completely.) Follow the steps below to connect the battery to the projector. - Page 8 HBB056 User Guide 2. Hold the projector and battery together. Turn the screw clockwise and tighten it. Plug the DC plug into the DC jacket on the projector, and then you can start using the projector. 3. You can still connect the tripod to the projector through the screw hole at the bottom of the battery.
- Page 9 HBB056 User Guide 4. When the projector is powered by the battery, a battery icon will appear at the bottom right corner of the main menu. The icon will show the capacity of the battery. It will start blinking when the capacity is too low. Later, when you see the warning message below, please power the projector with the power adapter, or start charging your battery.
-
Page 10: Charging The Battery
HBB056 User Guide Charging the Battery ＜Fast Charging＞ 1. Connect the battery to the power adapter, and then plug it to the AC socket. Accessory—Power Adapter AC Socket Note: Connecting the battery to any device to the USB port may increase the... - Page 11 HBB056 User Guide 2. The indicator will turn red when the battery is being charged. It takes about 4 hours for the battery to fully charge. The indicator will turn green when the battery is fully charged. Red: the battery is being charged.
- Page 12 HBB056 User Guide ＜Slow Charging＞ You can also charge the battery when the battery is connected to the projector. You can use the projector while the battery is being charged. The indicator will be green when the battery is fully charged.
Need help?
Do you have a question about the HBB056 and is the answer not in the manual?
Questions and answers