Panasonic LUMIX DMC-GX1KPP Service Manual page 65

Service Manual
Diagrams and Replacement
Parts List
Digital Camera/Lens Kit/Double Lens Kit/Body
Model No.
DMC-GX1PP
DMC-GX1KPP DMC-GX1GD
DMC-GX1KPC DMC-GX1PC DMC-GX1GH
DMC-GX1KEB DMC-GX1EB DMC-GX1GK
DMC-GX1KEC DMC-GX1EC DMC-GX1GN
DMC-GX1KEE DMC-GX1EE DMC-GX1GT
DMC-GX1KEF DMC-GX1EF DMC-GX1XPP
DMC-GX1KEG DMC-GX1EG DMC-GX1XPC
DMC-GX1KGN DMC-GX1GC DMC-GX1XEB
Vol. 1
Colour
[DMC-GX1K] [DMC-GX1X]
(K)......Black Type (K)......Black Type
(S)......Silver Type (except EC/EE/GN) (S)......Silver Type (except PC)
[DMC-GX1] [DMC-GX1W]
(K)......Black Type (K)......Black Type
(S)......Silver Type (except PC/EC/EE/EF/GK/GN) (S)......Silver Type
DMC-GX1K series: Interchangeable Lens (H-FS014042) is bundled.
DMC-GX1X series: Interchangeable Lens (H-PS14042) is bundled.
DMC-GX1W series: Interchangeable Lens (H-H014/H-FS014042) are bundled.
Table of contents
S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1
S2. Block Diagram .......................................................................... S-2
S2.1. Overall Block Diagram .......................................................... S-2
S3. Schematic Diagram .................................................................. S-3
S3.1. Interconnection Diagram ....................................................... S-3
S3.2. Top Operation Schematic Diagram ....................................... S-4
S3.3. Flash Schematic Diagram ..................................................... S-5
S3.4. EX LVF Schematic Diagram .................................................. S-6
S4. Print Circuit Board .................................................................... S-7
S4.1. Top P.C.B. ............................................................................. S-7
S4.2. Flash P.C.B. .......................................................................... S-8
S4.3. EX LVF P.C.B. ....................................................................... S-8
S5. Replacement Parts List ............................................................ S-9
S6. Exploded View ....................................................................... S-19
S6.1. Frame and Casing Section.................................................. S-19
DSC1112063CE
S1. About Indication of The Schematic Diagram
S1.1. Important Safety Notice
DMC-GX1XEC DMC-GX1XGN
DMC-GX1XEE DMC-GX1XGT
DMC-GX1XEF DMC-GX1WGC
DMC-GX1XEG DMC-GX1WGD
DMC-GX1XGC DMC-GX1WGH
DMC-GX1XGD DMC-GX1WGK
DMC-GX1XGH DMC-GX1WGT
DMC-GX1XGK
S6.2. Camera Lens Section (1) .................................................... S-20
S6.3. Camera Lens Section (2) .................................................... S-21
S6.4. Camera Lens Section (3) .................................................... S-22
S6.5. Packing Parts and Accessories Section (1) ........................ S-23
S6.6. Packing Parts and Accessories Section (2) ........................ S-24
S6.7. Packing Parts and Accessories Section (3) ........................ S-25
S6.8. Packing Parts and Accessories Section (4) ........................ S-26
COMPONENTS IDENTIFIED WITH THE MARK
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.
1.Although reference number of the parts is indicated on the P.C.B. drawing and/or
schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.
when the TP (Test Point) indicated as "
3.The voltage being indicated on the schematic diagram is measured in
"Standard-Playback" mode when there is no specify mode is mentioned.
4.Although the voltage and waveform available on here is measured with standard frame,
it may be differ from actual measurement due to modification of circuit and so on.
5.The voltage being indicated here may be include observational-error (deviation) due to
internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.
6.Use the parts number indicated on the Replacement Parts List .
7.Indication on Schematic diagrams:
Circuit name being connected.
OFTR FEP
Name of Signal
S-1
HAVE THE SPECIAL CHARACTERISTICS
" mark.
This signal is connected
to the FEP schematic diagram.