All controls can be setup individually via the Traktor setup and attributed to every desired function. A modifier control makes this even easier. To sum up, the 4TrackTrigger is the ideal partner for a setup with a 4-Channel-DJ-Mixer and this is not only because of the matching form-factor. The 4TrackTrigger offers everything that is needed for a cultivated mix.
Use a soft towel or brush to clean the instrument. Please do not use any cleaning liquids or water, so you avoid any damages to the instrument. Usermanual 4TrackTrigger TP2.5 4 / 18...
• CNC shaped case Aluminium from Swiss aircraft industry (Avional) • Compact and ergonomic • Eloxalprint scratch proof layout, clearly designed Setup files • 4TrackTrigger Traktor.zip all files are suitable for Windows or Mac Usermanual 4TrackTrigger TP2.5 5 / 18...
• Blinking System Led indicates that the controller is not yet recognized by the computer. • The controller is recognized by the computer as '4TrackTrigger' or 'USB audio device'. • Import the setup file '4TrackTrigger V03.tsi' by clicking the add button in Traktors Preferences / Controller Manager and don’t forget to activate the midi- in and midi out ports for that...
SHIFT + BROWSER The Main volume potentiometer controls the overall output level Encoder SHIFT + Push By pushing the Shift button and Browser encoder at the same time, the fullscreen BROWSER Encoder mode can be activated. Usermanual 4TrackTrigger TP2.5 7 / 18...
Page 8
• Button 3 in the FX1 section defines the midi channels 9 to 12 Important: the 4TrackTrigger setup only works on midi channels 9 to 12 • Button 4 in the FX1 section defines the midi channels 13 to 16 •...
By pushing Shift and Copy button at the same time, Refresh / Get monitor state is SHIFT + COPY Button activated and synchronises the 4TrackTrigger Led’s and displays with the current status of the Traktor Software No loop stored: Starts / stops recording a loop...
Param1, 2 or 3 to select FX types. FX types will be stored in device by releasing Preset button By using the Shift and Preset button, a Snapshot can be made, which saves the SHIFT + PRESET Button current effect settings as a default Usermanual 4TrackTrigger TP2.5 10 / 18...
FWD Button Serves to move a Beatjump one beat forward. (Attention! The Move mode is always (next to the Shift Button) set to Beatjump as well as the Move size adjusted to 1 beat.) Usermanual 4TrackTrigger TP2.5 11 / 18...
SHIFT + SYNC Button the desired deck. The Sync Led is blinking. The Sync Led is lit when Sync is active and is blinking when the track deck is SYNC Led selected as master. Usermanual 4TrackTrigger TP2.5 12 / 18...
Page 13
The Seek / Play encoders are used for coils in the decks. The track will be forwarded to the end by turning the encoders clockwise, for rewinding back to the SEEK / PLAY Encoder start, anti-clockwise. Push the Seek / Play encoder shortly to start or stop a playback. Usermanual 4TrackTrigger TP2.5 13 / 18...
1 – 4. The decimal points serve as minus sign for the filter indications. Key-array Control element Function The Hotcue Button 1-4 controls the following functions: Capture (load from Loop HOTCUE 1-4 Button Recorder) / trigger / mute / unmute Sample Slot 1-4 Usermanual 4TrackTrigger TP2.5 14 / 18...
Page 15
This is similar to nudging a record to slow down or BEND BWD / FWD Button speed up as the tracks go slightly out of sync. Press the Bwd button to slightly slow down the loop and the Fwd button to speed it up. Usermanual 4TrackTrigger TP2.5 15 / 18...
ML.Out Led is lit. By selecting Beatjump, the current position of playing track can be moved B.JUMP Button (beatjump) with a pre-selected length forward or backward by turning the Move / Size Encoder. B.Jump Led is lit. Usermanual 4TrackTrigger TP2.5 16 / 18...
If the effect assign button FX1 is pressed, the corresponding deck will be allocated FX1 ASSIGN Button to FX slot 1. If the effect assign button FX2 is pressed, the corresponding deck will be allocated FX2 ASSIGN Button to FX slot 2. Usermanual 4TrackTrigger TP2.5 17 / 18...
To this end, the value is determined via Shift + Size button in the Loop-Recorder section, then calls up the system mode at the device and subsequently withdraws from it (each by simultaneously pressing the View button + Browse-Encoder). Usermanual 4TrackTrigger TP2.5 18 / 18...