Page 2
Squawk feature must be enabled). In the event of burglary, 24-hour or tamper alarm, EWS3 will activate the speakers and flash the blue LED indicators, while in case of a fire alarm, the device can flash the red LED indicator (both features require EWS3 Alarm LED and EWS3...
Page 3
Speakers for audio alarm indication TAMPER Tamper switches FRONT SIDE of ENCLOSURE ALARM (blue) ALARM (red) ALARM (blue) LED indication Description ALARM (blue) flashing Burglary, 24-Hour or tamper alarm in progress ALARM (red) flashing Fire alarm in progress EWS3 – Wireless Indoor Siren...
Page 4
Ensure to screw in properly for supervision of the back side by tamper switch MOUNTING POINT B 3. When installing EWS3, follow the recommendations for the installation to achieve the strongest wireless signal: Never install in the following Recommended: locations: 5 m to 30 m • face the front side of the...
Page 5
ATTENTION: Ensure that EWS3 device is properly fixed to the wall and the Mounting Point A portrayed in Fig. No. 4 and Fig. No. 5 is properly screwed in. Otherwise, the tamper switch will NOT supervise the back side of EWS3 enclosure (see also 4. EWS3 ZONE, PGM OUTPUT AND TAMPER).
Page 6
• one located on the front side of the PCB supervising the front cover in case it is illegally opened (see Fig. No. 1). • the other one located on back of the PCB supervising the back side of the enclosure in case the EWS3 is illegally detached from the wall (see Fig.
Page 7
For further infor- mation on how to dispose of this product correctly, contact the system supplier, or the local authority responsible for waste disposal in your area. EWS3 – Wireless Indoor Siren...
Need help?
Do you have a question about the EWS3 and is the answer not in the manual?
Questions and answers