XM XMP3 Installation Manual page 12

To remove, carefully lift the adhesive pad with your fingers or a spoon . Warming the pad with a
hair dryer for several minutes will help soften the adhesive .
You can reinstall the swivel mount using the extra adhesive pad .
Installing the vent mount
1
Locate a vent with horizontal slats
sturdy enough to hold your XM cradle and radio .
2 Adjust the clamps to fit your vent .
3 Snap the mount onto the vent .
To remove, push the mount into the vent, then lift up .
This Manual: http://www.manuallib.com/file/2669124
11