Alignment; Factory - Sankey CLCD-2630 Service Manual

5- ALIGNMENT

FACTORY

1. This mode uses the special remote control. Turn on the LCD TV. Press SMODE until
"Theater" display on the screen. Press SLEEP until "120min" display on the screen. Press the
green button.
2. The factory mode will be displayed.
3. Access the adjustment mode by pressing the ◄/► button. The adjustment parameters
adjusted are listed in the accompanying table, and they are selected by pressing the ▲/▼
button.
4. Press ◄/► button to select the selection, adjust item value, or enter sub menu.
- 8 -