Do you have a question about the DP-600 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Medeli DP-600
Page 2
Welcome... Thank you for purchasing our Digital Piano. The use of high technology and the most advanced sampling technique brings you high quality sound and enjoyment. The combination of digital pianoand electronic keyboard features let you perform perfectly. We hope this skillfully built digital piano will be able to explore your creativity, and brings you unlimited happiness and music enjoyment.
Contents Set-up Guide Custom style 25-26 General Guide Reocording a custom style Clear a custom style The Connectors Playing a custom - Using the AC power jack Metronome - Using headphones Recording 27-28 - Using AUX.OUT jack - Using the foot pedals 1.Record waiting - Using the MIDI IN/OUT jacks 2.Record start...
Page 4
Main Features Sound Generation The sounds are based on PCM and Wavetable technology. Operation system You can select the Voices and Styles at high speed with the Direct Select Button or Dial on the panel. Voice DP600`s ROM contains 142 permanent Voices including 12 Chinese traditional Voices and 2 Drum kits, and you can select one of them directly by the 40 Panel Voice.
Set-up Guide Before proceeding to assemble the stand, get before a Phillips screwdriver(not supplied) Make sure you have the following parts, which are supplied into package( see the Fig.1): Bottom crossbar with three pedals group Right leg Left leg Rear panel Piano cabinet N.5 M4X15mm screw N.2 Adhesive clamp(put together with manual in a bag)
Page 6
Set-up Guide Follow the illustration below and finish off the set-up procedures. Fix on pedal group(N) with the pedal clog(M) as shown in Fig. 1. Fix and well tighten the left leg(C) and Right leg(B) to crossbar(A) with screws(H). Insert the 4hand screw plastic cover(N) into the legs holes. Fix the rear panel (D) to the crossbar(A) with 3 screws(F) and to the legs(B &...
Page 7
Set-up Guide Attach 2 adhesive clamps (G) on stand and cabinet. Insert the DIN plug of pedals cable into the proper socket of cabinet; Fix the cable into adhesive clamp (G). Adhesive clamps Place the piano in its final location and adjust on floor the clog (M) under pedals group.
General Guide Top View Rear View Front View Control Panel Headphones Jack Pedal Jack Soft Pedal MIDI IN/OUT Jack Sustenoto Pedal AUX. OUT Jack Sustain Pedal AC Power Jack Music Stand Piano Keyboard...
The Connectors Using the AC power jack POWER Ensure the piano Turn the volume switch is turned off when anti-clockwise to reach connecting and the minimum volume disconnecting the level. power. Connect the power Plug the power cable cable to the AC power into an AC power jack on the underside outlet.
The Connectors Using the Foot Pedals Connect the plug of the foot pedal unit to the pedal jack on the rear panel. You will experience the sustain effect. Using the MIDI IN/OUT Jack MIDI stand for Musical Instrument Digital Interface. MIDI is a world wide standard that makes it possible for various electronic musical instruments and other devices.
Basic Operation Power Switch & Volume Turn the [POWER] switch on.The LCD display lights up. POWER Use the volume control switch to adjust the volume to your desired level Note: If the LCD display does not light up after you turned on the piano, please check the power supply.
Basic Operation Demonstration There are 8 Demos at all (see Appendix 3) Play Demo Press [DEMO] button to DEMO mode, the DEMO flag is lightened on LCD, and hold the [DEMO] button over 3 seconds, it will play the current demo repeatedly, and all the demos play one by one. LCD displays the demo's name and number.
Vocies and Effects Voice Selecting Voice numeber 142 voice at all (Appendix 1), including 128 GM voice, 12 Chinese voices, and 2 percussion voices. Voice setting “ ” The default VOICE R1 is No.001; LCD displays VOICE R1 and the voice name. Press [+/YES]/[-/NO] button or use dial to select the voice wanted.
Vocies and Effects Dual Voice “ ” Press [DUAL] button to turn on the DUAL VOICE, when VOICE R1 is lightened off , VOICE R2 and dual flag are both lightened. The dual voice name is also displayed on the LCD. Press [+/YES]/[-/NO] button or the dial to select the dual voice number.
Vocies and Effects Sustain Press [SUSTAIN] button to turn on the sustain effect with the lights of sustain flag on LCD. In this mode, the keyboard has the sustain effect. Press [SUSTAIN] button again to turn off the sustain effect. Sustain flag darks on LCD. SUSTAIN Note: “...
Vocies and Effects Portamento/Modulation Press the [PORTAMENTO/MODULATION] BUTTON to portamento or modulation mode. Portamento mode In portamento mode, press and hold the [PORTAMENTO/MODULATION] button, and the portamento flag on LCD is lightened. Play the keyboard note consecutively from one note to another. Release the [PORTAMENTO] button to quit portamento mode.
Playing the Styles Select a style There are 100 styles, from 001 to 100. The default style is 001. Press [Style/Voice/Song] button to the style mode. LCD lights the style flag and displays the style name. Press [+/YES]/[-/NO] button or use dial to select the style you want. STYLE / VOICE SONG / NO...
Playing the Styles SYNC Start:: Beats on LCD flash simultaneously in current tempo when pressing [SYNC] botton. Press [INTRO/ENDING] button to inset INTRO. LCD lights the intro flag. The INTRO plays automatically when playing the keyboard at the same time. START / STOP SYNC FILL-IN A...
Playing the Styles In NORMAL mode: Press [FILL B] button to insert 1 measure fill. “ ” LCD displays FILL A-B after changing to the VARIATION style. “ ” LCD displays MAIN B temporarily. FILL-IN B In VARIATION mode: Pres [FILL A] button to insert 1 measure fill. “...
Playing the Styles Press [ACCOMP+] and [ACCOMP-] button simultaneously to turn off the ACCOMP volume. “ ” LCD displays OFF Accomp . ACCOMP VOLUME ACCOMP VOLUME TEMPO TEMPO Press [ACCOMP+] and [ACCOMP-] button simultaneously again to turn on the ACCOMP volume.
Playing the Styles ★ Fingered detect Play the Fingered Chord on the keys below the Spilt point. 1.Choose your desired style.( See appendix 2) 2.Press the [START/STOP] button to start to playback the style. 3.Play the desired chords by following the Chord Chart in appendix 5. A total of 30 chords are provided as follows: Tempo Press either [TEMPO+] or [TEMPO-] button or the dial to change the tempo and set the default tempo.
Function menu The items which can be adjusted in function menu are as follows: Adjust Item LCD Display Adjust Range Default Value Unit ~ Transpose Transpos 12 12 Halftone ~ Tune Tune 50 50 Semitone - ~1 Octave Octave Octave ~...
Function menu Octave The LCD displays the octave value. Use [+/YES]/[-/NO] or the dial to change the octave value. This function can change the right area of keyboard from - 1 to 1 octaves. Press [+/YES] and [-/NO] simultaneously will set the tune value to the default The default octave value is 000.
Function menu Pedal assign The LCD displays the type of pedal. Use [+/YES]/[-/NO] button or the dial to change the assigned pedal It can be set as sustain pedal, soft pedal, start/stop pedal, and pedal tap or memory select pedal. The default pedal is the sustain pedal.
Function menu Key portamnto/modulation assign “ ” Press [FUNCTION] button to KEY Potm/Key Modu displayed . use [+/YES]/[-/NO] button to select the PORTAMENTO or MODUATION mode, and the corresponding flag is lighten on LCD. The default KEY ASSIGN is set as the 001 PORTAMENTO. FUNCTION / NO / YES...
Custom style You can create your style pattern by using the CUSTOM STYLE feature. The created pattern, which is two-measure length, is recalled anytime by pressing [CUSTOM STLE] button. Reocording a custom style While the [RECORD] button is being held down, press the [CUSTOM STYLE] button. The LCD displays “...
Custom style Clear a custom style The two-recorded measures beats will be repeatedly played back so that you can record even a single instrument in several turns. If you want to erase an unnecessary instrument, you can clear it by using the following method.
Recording Record waiting Press [RECORD] button, flashing four beats on LCD simultaneously indicates the record waiting status. The voice, style, memory and recording tracks can be selected in this status. After selecting the recording track, the relevant LCD(s) will flash and indicate that the track is ready for recording.
Recording Record stop Stop automatically “ ” In the case the capacity is full, the record will be stop automatically. FULL displays on LCD. Press [INTRO/ENDING] button to stop recording in the end. FILL-IN A FILL-IN B START / STOP SYNC INTRO / ENDING ACCOMPANIMENT CONTROL...
Song There are 60 songs at all (see Appendix 4 Song List) Start/stop the song 】 Press [STYLE/VOICE/SONG button to song mode, it will play all the 60 songs one by one. After pressing [START/STOP], [+/YES]/[-/NO] or [MELODY OFF] button, it will play the current song repeatedly.
Memory Bank There are 8 banks at all. Each bank has 6 memories (M1~M6). “ ” Press [BANK] button, the LCD displays 001 MEM BANK . Use [+/YES]/[-/NO] button or the dial to select the bank. BANK / NO / YES Store and Load Press [STORE] and do not release it, press M1(or M2~M6) meanwhile.
One touch setting It can setup 4 groups O.T.S parameters to fit the current style including voice, style, and volume. “ ” Press [O.T.S] button, LCD displays the O.T.S flag. In this mode, the [M1]~[M4]button can load 4 groups of parameters for current style. LCD displays the current O.T.S number. [M5] and [M6] is no use in this mode.
Pedal Damper pedal Use [FUNCTION ] button to set the pedal assign. (See in FUNCTION SELECT) FUNCTION Pedal sustain “ ” If pedal assign is set as pedal sustain , it has the sustain effect when stepping the pedal. Turn off sustain effect when releasing the pedal. Pedal soft “...
MIDI What is MIDI MIDI Musical Instrument Digital Interface. The standard interface between PC and Electronic instrument. It is equipped with standard MIDI interface, including 1 MIDI IN and 1 MIDI OUT. Connection It can connect with PC or other MIDI equipment. MIDI connection Connection rule “...
Need help?
Do you have a question about the DP-600 and is the answer not in the manual?
Questions and answers