Mobile Device Setup
To prevent loss of data, your mobile device will not
be able to connect to the Dashcam while there is
an ongoing recording.
1. On the Dashcam, enable the
After a short moment, the Dashcam will restart and
display its Wi-Fi network name (SSID) at the top of
the screen for a few seconds.
2. Go to your mobile device's Wi-Fi settings screen
and select the Dashcam Wi-Fi network name from
the list of available networks.
3. Launch the DriveEye Ultra app.
4. On the Home screen, tap
Dashcam's Wi-Fi network name from the list.
Note: If the Dashcam's Wi-Fi network name doesn't
appear, tap
Turn off the Dashcam's Wi-Fi when you're not
using it to extend the Dashcam's battery life
between charges.
Local
to rescan.
WiFi-Local setting.
and then select the
11