Before First Use - CDA PC87 Manual For Installation, Use And Maintenance

Before First Use

You must allow the fridge to settle for at least twenty four hours
prior to switching the power on.
It is recommended that you clean the interior of the appliance prior to
first use, using a solution of bicarbonate of soda and warm water and
then thoroughly dry the interior.
The fridge may have an odour to it at first use. This will disappear as
the appliance cools.
Do not load the appliance with food until it reaches the required
temperature.
Please note:
Upper end of fixed le g
The appliance will work continuously until it comes down to the correct
temperature.
Lower end of fixed le g
If the appliance is switched off, you should allow five minutes
before switching it on again to prevent unnecessary damage to the
compressor.
The fridge shelves can be moved according to storage requirements.
To move the shelf, tilt the shelf upwards and then unhook the shelf
Slot
at the top. To replace, slot the top of the shelf into the housing, then
fig. 1
lower the front section to locate the lower supports in place.
4