Advertisement
Quick Links
Advertisement
Summary of Contents for Eye3 Mobile E3d
- Page 1 Eye3Mobile Eye3Mobile Wireless Microphone User Guide...
- Page 2 Basic Operation...
- Page 3 Product Images...
- Page 4 Wiring Diagram...
- Page 5 2.4GHZ Digital Wireless Microphone System USER GUIDE...
-
Page 6: Table Of Contents
TABLE OF CONTENTS 1. Description of the units ...............3 1. Quick Set Up and Operation ............4 2. Installation..................5 3. Guidelines For Best Performance..........6 4. Troubleshooting Guide..............7 5. Technical Specifications...............8 6. Factory Service ................9 7. Accessories and Parts ..............9... -
Page 7: Description Of The Units
DESCRIPTION Base (Receiver) Antenna Connection Audio Jack Input Terminal For charging Green LED: In-use, Record Modular Jack RED LED: Charging Green LED: Full charge Transmitter Green: In-use (Light On) Record (Flashing) RED LED: Low Battery RED LED: Out of Range Record Button Emergency Button Lapel Mic. -
Page 8: Quick Set Up And Operation
1. QUICK SET UP AND OPERATION Synching Up the Transmitter and Base The synch operation only needs to be performed the first time a system is used, or a new bodypack is used with a base previously synched to another bodypack. Do not perform the synch operation multiple times; it only needs to be done one time when a new bodypack is used with a new base. -
Page 9: Installation
2. INSTALLATION PIN DESCRIPTION OF THE BASE OUTPUT PORT Connector wire (RJ45) Pin #1 : Transmitter Audio out Pin #2 : In Car Mic. Audio out Pin #3 : 12V DC_IN Pin #4 : Ground Pin #5 : Record Trigger OUT Pin #6 : Record Trigger IN Pin #7 : Panic Trigger Out Pin #8 : In Car Mic. -
Page 10: Guidelines For Best Performance
Type B Wire the un-terminated signal wires to the control unit according to the signal chart. A 5 Amp fast blow fuse is recommend in the 12VDC power supply line to protect the equipment. Pin #1 : Transmitter Audio out Pin #2 : In Car Mic. -
Page 11: Troubleshooting Guide
The PW24 system has 95 possible “channels” that are really different frequency hopping schemes. Each synchronized base and transmitter will automatically find a clear channel so up to 40 systems can work together in one location depending on other interference problems Potential Sources of Interference There are many potential sources of interference for your wireless system. -
Page 12: Technical Specifications
5. TECHNICAL SPECIFICATIONS RECEIVER BASE STATION Controls Video Trigger Active +12/GND Indicators INUSE LED: GREEN CHARGE LED : CHARGING -> RED FULL CHARGED -> GREEN RECORD LED GREEN FLASHING Connections In Car Mic. 2.5mm Mono Plug Un-terminated Cord +12V DC Power BLUE Record Trigger out (Record on =DC12V, OFF= GND) YELLOW... -
Page 13: Factory Service
6. FACTORY SERVICE ( NORTH AMERICA ) Eye3Data 9624 Cincinnati-columbus Rd. Cincinnati, OH 45241 Tel: 888-777-9059 Fax: 513-898-0206 8. ACCESSORIES AND PARTS Police Wireless GPW24 Model DESCRIPTION PWB-24 Transmitter with internal microphone, battery, belt clip PWR-24 Receiver and recharge station, RJ45 cable EXA-2410F External ANT –...
Need help?
Do you have a question about the E3d and is the answer not in the manual?
Questions and answers