Modal MD-SPBT01 User Manual page 10

To reconnect a paired device:
1
Turn on your Bluetooth speaker.
2
Turn on your Bluetooth device and the Bluetooth feature on the device.
3
The LED on your speaker system blinks white and red and your Bluetooth
speaker searches for the last connected Bluetooth device.
If the device is within range of your Bluetooth speaker, with no
obstructions between your Bluetooth speaker and the device, pairing
should take place. When this occurs, the white LED on your speakers
lights solid.
Note: The auto connect feature may not work with some Bluetooth devices. If a
device does not automatically reconnect, you need to select your Bluetooth speaker
on your Bluetooth device.
Connecting to a device with an audio cable
To connect to a device using an audio cable:
• Connect a 3.5 mm audio cable (not included) from your speaker to your
audio device.
Note: When an audio cable is connected to the AUX IN port, the speaker
automatically switches to AUX mode. Your Bluetooth device may still be paired to the
speaker, but you will not be able to control the volume level during playback.
Disconnect the audio cable to switch back to Bluetooth mode.
Controlling volume and playback
To control volume and playback:
1
Use the controls on your audio device to play, pause, and select tracks.
2
Press + or – to raise or lower the volume (make sure that the volume level
on your Bluetooth or AUX device is at least 50%).
3
Turn your Bluetooth speaker face down to mute the sound.
10