Okina LTV15RS User Manual

15” led backlight lcd monitor 19” lcd monitor hdmi, bnc in, bnc loop out & rs485

Advertisement

Quick Links

LTV15RS
LTV19RS
HDMI, BNC In, BNC Loop Out & RS485

FEATURES

Compatible with VGA (640 x 480), SVGA (800 x 600), XGA (1024 x 768), SXGA (1280 x
1024) resolution -- SXGA for 19" LCD only
Built-in RS485 function to operate PTZ dome or camera / DVR and monitor group
management by remote controller
Video input HDMI x1 / BNC x 1 / VGA x 1 ; Video output BNC x1
Audio input RCA x2 / phone jack x 1
Eco-friendly concept with LED backlight: Saves energy & power -
Picture-In-Picture feature that allow multi-picture display
High brightness level and contrast ratio with super wide viewing angle
Built-in speaker x 2
Built-in 3D comb filter and 3D de-interlace for crisp picture quality
Fast response time and refresh rate without time lagging
Provides 6500°K and 9300°K color temperature selection for user's preference
Video looping Output supports 75ohm auto termination
VESA standards (100mm x 100mm) bracket
Copyright © 2012. All Rights Reserved.
www.okinausa.com
15" LED Backlight LCD Monitor
19" LCD Monitor

USER MANUAL

*
Only available for LTV15RS
M-101_M-102
R201202-V08

Advertisement

Table of Contents
loading

Summary of Contents for Okina LTV15RS

  • Page 1: Features

     Audio input RCA x2 / phone jack x 1  Eco-friendly concept with LED backlight: Saves energy & power - Only available for LTV15RS  Picture-In-Picture feature that allow multi-picture display  High brightness level and contrast ratio with super wide viewing angle ...
  • Page 2: Warnings & Cautions

    Please read the Manual before attempting to use this product. Specifications and appearance are subject to change without notice. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS. Disposal of Old Electrical &...
  • Page 3 ACCESSORIES Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury, and serious damage to the unit. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
  • Page 4: Limited Warranty

    Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 5: Table Of Contents

    TABLE OF CONTENTS Features………………………………………………………..………………………….. Warnings & Cautions………………………………………………….…………………. 2-4 Limited Warranty…………..……………………………………………………………… Table of Contents………………………………………………….…………….……….. List of Components…………………………………….…………………………………. Dimensions……………………………………………….………………………….……. Exploring Your New Monitor…………………………………………………………….. 6-7 Rear Connections…….……………………………………………………………….…. Monitor Setup…………………………………………………………………….………. RS485 Remote Controller………………………………………………………….…… 9-12 Video/HDMI Setting………………………………………………………….…….……. VGA Setting………………………………………………………………………………. 14 Audio Setting……………………………………………………………………………… 15 PIP Setting…………………………………………………………………………….….. 16 System Setting……………………………………………………………………..………...
  • Page 6: Dimensions

    16.54” / 420mm 13.38” / 339.9mm 15” 19” LTV15RS LTV19RS EXPLORING YOUR NEW MONITOR You can operate your monitor by using the buttons on the front panel. The side panels provide the inputs to connect other equipment to your monitor.
  • Page 7: Rear Connections

    Rear Side REAR CONNECTIONS 1. Power in :DC 12V input 2. HDMI: HDMI input(1080p) 3. VGA: VGA input 4. RS485 jack. Camera, P/T/Z dome or DVR connect DC5V/GND power out.(DC5V/500mA/GND) 5. AUDIO IN: PC audio input 6. AUDIO IN: Audio input. RCA jack. 7.
  • Page 8: Monitor Setup

    MONITOR SETUP LED indicator IR receiver Light sensor AUTO: Auto-optimize displaying picture under PC mode. Enter: This “ Auto” Button can be either “Enter” function in OSD Menu) MENU: OSD menu ON / OFF control.(EXIT Item) ADJUST: Increase or decrease the value on OSD menu. ►...
  • Page 9: Rs485 Remote Controller

    RS485 Remote Controller Before device control, please set the RS485 setup. Press RS485 set button in to RS485 menu. CAMERA ID DVR ID Protocol Pelco D Baud Rate 9600 Speed Normal Press to change control mode LCD mode User operates the function by control remote. See LCD key define DVR mode User operates the function by control remote.
  • Page 10 LCD / DVR / CAM control mode switch Call desire LCD / DVR / CAM Device Menu Displays the LCD source information LCD volume setup LCD audio soundless VGA mode auto adjust Quit desire DVR OSD setup or number wrong typing Direct to select the AV1 source input Direct to select the VGA source input For HDMI...
  • Page 11 Picture ratio under / full / over select Channel sequence Quad screen select 9 split screen select 16 channel select Jump to playback mode Manual record Jump to time search of playback mode Jump to backup mode CAM(P/T/Z dome) PTZ dome ID select / Set;Call;Clear preset DVR full channel select FOCUS PTZ dome’s Lens in manual focus...
  • Page 12 IRIS PTZ dome’s Lens in manual Iris PTZ dome’s Lens in manual Iris ZOOM Control PTZ dome’s Lens zoom in and out PRESET Set a preset point Call a preset point Clear a preset point...
  • Page 13: Video/Hdmi Setting

    Video / HDMI Setting Brightness: Adjusts the overall picture shade and brightness. Contrast: Permits adjustment of contrast between light and dark areas of the picture. Saturation: Adjusts the intensity of the color. Hue: To determine the lightness and colorfulness of the picture. Sharpness: Sets the desired sharpening enhancement to the picture.
  • Page 14: Vga Setting

    VGA SETTING Brightness: Adjusts the overall picture shade and brightness. Contrast: Permits adjustment of contrast between light and dark areas of the picture. Auto Adjustment: Picture adjustment automatic correction, like clock and phase. Image H Position: Allows adjustment for horizontal position. Image V Position: Allows adjustment for vertical position.
  • Page 15: Audio Setting

    AUDIO SETTING Controls built-in speakers’ output volumes. Volume: Balance: Adjusts the softness of loudness of notes in the sound. Mute: To disable the audio function. To enable, press MUTE again.
  • Page 16: Pip Setting

    PIP SETTING PIP Mode: This function allows the PIP mode to be selected. PIP Source: This function allows the source of the PIP to be selected. PIP Swap: This function allows the position of PIP to be exchanged. POP Zoom: Only Operate under POP (Side By Side) mode.
  • Page 17: System Setting

    SYSTEM SETTING Aspect Ratio: To change the display mode. Auto Source Detection: The monitor will auto detect the video source when power ON. Color Temperature: Selects color temperature of either 6500°K or 9300°K. Key Lock: The Key-Lock function is provided to prevent tempering. To unlock, press AUTO and MENU.
  • Page 18: Information

    INFORMATION CAM ID: Select PTZ dome ID address. CAM Protocol: Select PTZ dome protocol. CAM Baud Rate: Select PTZ dome baud rate. PTZ Speed: Select PTZ control command speed. DVR ID: Select DVR ID address. DVR Protocol: Select DVR protocol. (now only HS) And customized protocol. DVR Baud Rate: Select DVR baud rate.
  • Page 19: Troubleshooting

    TROUBLESHOOTING Before calling a service technician, please check the following table for a possible cause of the problem and some solution. Symptom Solution Monitor will not turn on Make sure the power cord is plugged in, then press the POWER button No picture, no sound Check the cable connections No sound, picture OK...
  • Page 20 HDMI Timing Format Resolution Type Vertical frequency 480i/p 720x480 60Hz 720p 1280x720 60Hz 1080p 1920x1080 Full HD 60Hz PC RGB Input Input Signal Analog RGB 0.7Vp-p Input Impedance 75 Ohm ± 2% Polarity Positive, Negative Amplitude 0 ~0.7 ± 0.05Vp Horizontal Frequency: 30~80KHz Multi-mode Supported Vertical Frequency: 50~75Hz...
  • Page 21: Specification

    SPECIFICATION Model LTV15RS LTV19RS Screen Size 15-inch 19-inch LED Backlight Button Control Power / OSD Control / Source 640 x 480 @ 60/72/75 640 x 480 @ 60/72/75 800 x 600 @ 56/60/72/75 Display Resolution 800 x 600 @ 56/60/72/75...
  • Page 24 www.okinausa.com MADE IN TAIWAN...

This manual is also suitable for:

Ltv19rs

Table of Contents