Gizmo AudiodynamixADX User Manual

ADX

1 Preface

Thanks for purchasing Audiodynamix Gizmo Ultra portable Bluetooth®
speaker. Please take the time to follow the instructions in this User
manual carefully. If you have any query, please call our national service
hotline: 400-0985-400

2 Warnings and Cautions

1. To reduce the risk of re or electric shock, be sure the electrical
circuits are not overloaded.
2. To reduce the risk of electronic shock, be sure not plug the adapter
with wet hands.
3. Unplug the power cable if your device is smoking or abnormal and
seek professional help from your nearest service center, be sure not
detach the device yourself.
4. To reduce the risk of re or electric shock, do not expose this product
to rain or moisture. Liquids can cause a failure and/or a re hazard.
Gizmo User Manual 5. The power cable and audio cable can not be twisted or dragged in
case of short circuit.
Bluetooth® device, then other mobiles can be available to connect, and connecting with other non-Bluetooth audio devices,eg mobile
the operation steps will also be same as before. phones,mp3/mp4 players.pc. tablet pc and etc.
Plug one end of the audio cable to the AUX in jack of the speaker and
How to connect the Gizmo with your notebook pc by Bluetooth®? the other end connect to audio source AUX jack.
1. In the case of your notebook with the Bluetooth® function. Step2: Your speaker will disconnect the Bluetooth®, switches to the
Step1: Start your notebook, search the Bluetooth® device by external source play, as the external source of AUX-in mode is prior.
"Start—Setting—Control Panel".
Step2: Start the Bluetooth® searching function of your notebook, blue How to pair your speaker with two playback devices?
light ashes when searching the Audio-in devices. Your Bluetooth speaker support to pair two playback devices at the
Step3: Blue indicator light remains steadily on after connecting
same time.just follow the step 1 to pair two playback devices. Please
successfully. note the other playback device can not play audio when one playback
Step4: You can play the audio music of the notebook by the speaker. device is playing. You need to pause one player if you want to play
2. In the case of your notebook without Bluetooth® function. music by other device.
Please buy the Bluetooth® adaptor additionally. After installing please

7 Trouble Shooting

start the Bluetooth® from the "Control Panel" or the shortcut of your pc
desktop, please search for connecting, and the instruction steps are the
Speaker will not turn on?
same as the rst case.
Make sure your speaker battery has su cient power.
How to play music by AUX-in?
Paired Bluetooth device will not connect?
Step1: Your Gizmo comes with a standard 3.5mm Aux in jack for
6. Do not place any naked ame sources, such as lighted candles, on or

4 Structure Introduction

near the apparatus.

3 Standard Accessories

Gizmo User Manual
Gizmo Bluetooth® speaker x 1 unit
Micro USB charging cable x 1 unit
5
3.5mm Audio cable x 1 pc
6
User Manual 1 pc
If your device requires a pass code, make sure to input "0000"four Make sure your Gizmo is not muted and the volume is up.
zero. Make sure your Bluetooth device is playing audio and volume is up
Turn the Gizmo speaker o and back on Your Bluetooth device may be out of range, move closer and try
Remove the Gizmo speaker from the pairing list on your Bluetooth Turn your Bluetooth speaker o and back on
device pairing list (consult the device owner's manual for
assistance).Then pair the device and the speaker again. Poor sound quality from a Bluetooth device?
Your Bluetooth device may be out of range, move closer and try
Speaker indicates a connection, but it not playing music? again
Turn o or disable Bluetooth on all other paired devices nearby and Move your Bluetooth device and /or Gizmo speaker from any device
reconnect the device you want to listen that generates electromagnetic interference, such as another
Turn the Gizmo speaker o and back on Bluetooth device, cordless phone, microwave oven or wireless router.
Try to turning o WIFI to improve audio quality
Can not pair the Gizmo with my Bluetooth device ? Make sure your music le is not poor quality.
Make sure your speaker is discoverable Turn your Bluetooth speaker o and back on.
Your Bluetooth device maybe out of range-try to move closer to
your speaker No Audio from AUX source?
Make sure your Bluetooth device supports the transfer of audio Make sure your connected device is on and playing
Reset your Bluetooth speaker Make sure you speaker is in AUX in mode
Make sure the audio cable is correctly inserted
No audio from a Bluetooth device? Increase the volume level on the device and speaker
1 Power on/o ; USB port of your PC /power bank to charge the device. The limited
2 Play/Pause button. In Bluetooth® mode, short press is for Pause. voltage is 5V.
The button is invalid in the AUX-in mode. 8 AUX-in jack. Connect the Gizmo with your pc, MP3/mp4 player,
3 Previous track button. In Bluetooth® mode, short press is for Tablet, Mobile and other playback devices with 3.5mm jack by
previous track, long press is for decreasing volume, Note:the audio cable and Gizmo will disconnect the Bluetooth®
3
button is invalid in the AUX-in mode. automatically.
1
4 Next track. In Bluetooth® mode, short press is for next track, long 9 Chaging indicator. Red indicator lighted when charging, and o
press is for increasing volume, the button is invalid in the AUX after fully charged.
2
mode.
4

5 Indicator instruction

5 Microphone hole.
6 Bluetooth® disconnect button and Answer/Reject call. In
Indicator Color Gizmo working status
Bluetooth® mode, press and hold for 3 seconds to disconnect
Blue indicator ashes Status of waiting for connecting
Bluetooth®. In Bluetooth® mode, short press for 1 second to
Blue indicator remains Connected to Bluetooth® source or
answer the call, and long press for 3 seconds for rejecting call. In
steadlily on connected to aux in devices.
Aux mode, short press is invalid and long press for 3 seconds for
Low power indicator ashes Battery voltage lower than 3.3v, Red light
switch to the Bluetooth pairing mode.
ashes means your speaker need to be
7 Micro USB port is for connecting to DC 5V USB cable, to charge
7
charged
the Bluetooth® speaker. Please take note that power adaptor is not
Red charging indicator light Red indicator is on when charging, and
8
standard accessory of Bluetooth speaker. You can use your mobile
o when fully charged.
9 phone adaptor to charge the speaker or connect to
Poor sound quality from AUX source?
8 Speci cations
Reduce the volume level on the AUX source
Make sure the 3.5mm audio cable is fully inserted into the speaker
Product speci cation
and device.
Channel
Make sure your audio source and music le is not of poor quality
Ampli er
Speaker
Note:
Size
1 Your speaker will power o automatically within 15 minutes if you did not pair it
Weight
with playback devices in order to save energy. You need to power on speaker again
when use.
Technical Parameters
2 Bluetooth® compatibility note: Gizmo can be compatible with most of Bluetooth®
RMS
devices with the di erent brands and models, but some individual Bluetooth®
Bluetooth® chipset
devices may have compatibility problem with the Gizmo. If youz need further
Bluetooth® version
assistance, please contact our technical customer service: 0086-755-83222871. support@audiodynamix.co.uk
Supported protocol and pro le
3.If your speaker paired with over 8 playback devices already. There will be 2 or more
Working current
seconds delay for scanning and pair with new playback devices. Because your
Working voltage
speaker need to scan the previous paired devices rstly to re-pair with them
Sensitivity
automatically. Simply to hold the previous track and next track button at the same
S/N
time for 3 seconds to clean all the memory devices and resume default settings.
Distortion
A

6 Operation Steps

How to connect your Gizmo with Bluetooth playback devices?
Step1: Be sure your speaker battery has su cient power.
Step 2: Turn on your speaker and it will be in Bluetooth mode
automatically and ready for connecting. The blue indicator ashes.. .
Step 3: Open the Bluetooth® of your mobile, search the "Gizmo" device
and connect to it. Usually you needn't to input password for most of
Bluetooth playback devices, but due to the Bluetooth version varies,
sometimes, you need to input the default password "0000"(four zero) if
required.
Step4: Blue light remains steadily on to indicate successfully
connected.
Step5: Run the music player of your mobile, and enjoy the loud but
clear sound from your Gizmo.
How to switch to connect to other mobile while connecting?
Your Gizmo supports connect to one Bluetooth playback device at the
same time only. You need to disconnect the previous pairing
Frequency response 90Hz-20KHz
Working temperature -10 50
DC output DC 5V
Battery Built-in 500mA battery
1.0Channel
Digital Ampli er
Full range Φ45mm 2

9 Statement

L64.5 x W64.5x H70.1mm 64.5 mm
261g The Audiodynamix trademark and logo are registered trademarks of
Audiodynamix. All Rights Reserved. All other trademarks, logos or
service marks are the property of their respective owners.
5W
CSR
V4.0
10 Contact us
A2DP AVRCP HFE HFP
Email: support@audiodynamix.co.uk
Max≤350mA
Audiodynamix Gizmo
Website: www.audiodynamix.co.uk
3.3V-4.2V
80db
≥80 db
≤0.3%
Limited Warranty
Your Audiodynamix Gizmo Bluetooth® speaker is covered by a limited
warranty. It is backed by 1 year performance warranty against any
manufacturing defects in material or workmanship from the date of
original purchase. This warranty entitles the purchaser to get the
product repaired or replaced under the following conditions:
The warranty applies to the original purchaser, Proof of original
purchase is required
The warranty does not cover the damage caused by misuse, abuse or
improper storage.
In no event shall Audiodynamix be responsible for any direct,
incidental, consequential or other damages of any kind.
Struggling to read the Manual?
for an easy to read PDF please visit our
website: www.audiodynamix.co.uk
and select 'Support' followed by
'User manual' or email:
support@audiodynamix.co.uk