5.5. HEADSET (TYPE 9010) OPERATION ................. 12 This document is the property of JOTRON 08.07.2010 REVISION, EM 1289 PHONTECH and must not be copied or shown to a 27.10.2008 FINAL DOCUMENTATION third person without our written consent. In the...
Page 4
Handbook page 2/50 Doc.No.: 0400-000-DE 5.5.1. Make a call out from the telephone to another station ............12 5.5.2. Answer a call from another station ..................12 INSTALLATION..........................13 6.1. SYSTEM CONFIGURATION ....................13 ...
Doc.No.: 08400-006-DE 1. GENERAL DESCRIPTION The batteryless telephone system is developed and manufactured Jotron Phontech as. The different modules in the system are designed to meet the need and demand for non- powered internal (sound powered) emergency communication on ships.
Handbook page 4/50 Doc.No.: 08400-006-DE 2. LIST OF TELEPHONE UNITS Type BTS 4040. 24 lines batteryless telephone. Type BTS 4050 Single line batteryless telephone. Type BTS 4051 Single line batteryless telephone with integrated amplifier Type BTS 4060 12 lines batteryless telephone. Type BTS 4061 12 lines batteryless telephone with integrated amplifier 2.1.
Handbook page 6/50 Doc.No.: 08400-006-DE 3. ADDITIONAL EQUIPMENT Type BTS 4000. Amplifier unit (separate) for a 4040 / 24 lines system Type 9000 Relay unit (for additional signal device) Type 4018 Plugbox for headset with “Call stop”. Type 0018 Headset with PTT switch and plug. (Connects to 4018) Type 9010 Headset with PTT switch.
Handbook page 8/50 Doc.No.: 08400-006-DE 3.4. HEADSET WITH PTT SWITCH AND PLUG, TYPE 0018 3.5. HEADSET WITH PTT SWITCH, TYPE 9010 9 meter CABLE Page 8 of 19...
Handbook page 9/50 Doc.No.: 08400-006-DE 3.6. PLUG-IN RELAY MODULE (BRD 99400-011) A relay module for activation of external signal device can be installed in the betteryless telephones: 4040 / 4050 / 4051 / 4060 / 4061 The relay module is to be mounted by the installer. The unit is delivered separately, and is to be plugged into the appropriate telephone unit.
Handbook page 10/50 Doc.No.: 08400-006-DE 4.2. 24 LINES BATTERYLESS TELEPHONE 4040 Handset with PTT button. Noise cancelling microphone. Piezo- electric buzzer for call indication. Call led. 20 seconds call delay timer. (24 VDC required) Call stop button. Call line rotary selector switch. Back lightning of the line selector and the call stop button.
Handbook page 12/50 Doc.No.: 08400-006-DE 5.5. HEADSET (TYPE 9010) OPERATION 5.5.1. Make a call out from the telephone to another station Put the headset on, with the microphone close to your mouth. Select the line by means of the line selector (not applicable to 4050/4051), Crank the generator (on the telephone) 3-5 turns.
The telephone units (all types) are delivered for flush mounting. Optional wall mounting boxes are delivered upon request. Jotron Phontech as highly recommends the use of junction boxes for the external cable distribution. Prepared junction boxes, type 4052 and 4053 are available.
Handbook page 14/50 Doc.No.: 08400-006-DE 6.5. CABLE REQUIREMENTS All cables used with the Batteryless Telephone System to be of approved ship cable type. ESPECIALLY IMPORTANT: Common outer screen Individually twisted pairs Recommended minimum conductor area is 0.50 mm² All cabling in the batteryless telephone system to be a separate network DO NOT COMBINE WITH OTHER CABLES.
Handbook page 15/50 Doc.No.: 08400-006-DE This in order to avoid damaged equipment for which Jotron Phontech will void warranty claims. 6.11. VOLUME ADJUSTMENT Please note that volume adjustment is preset to a normal environment. It is not possible to make individual volume adjustments on the telephones, but there is a common volume adjustment for the whole system.
Handbook page 16/50 Doc.No.: 08400-006-DE RV1 POSITION IN THE 4051/4061 UNITS (BRD 99400-001): 7. TECHNICAL DATA. TELEPHONE UNITS 4040/4050/4051/4060/4061 Dimensions flush mounting: 240 x 144 x 70 mm. (h x w x d) Cut- out measurement flush mounting: 212 x 116 mm. (h x w) Dimensions wall mounting wall mounting box included: 242 x 146 x 73 mm.
Handbook page 19/50 Doc.No.: 08400-006-DE 10. SINGLE LINE DIAGRAM – 24 LINE SYSTEM PHONTECH 4040 PHONTECH 4040 PHONT ECH 4040 PHONT ECH 4040 PHONT ECH 4040 PHONT ECH 4040 4 0 1 8 H E A D S E T C A L L S T O P PHONT ECH 4040...
Page 41
RELAY SWITCH BOARD FOR BATTERYLESS SYSTEM 99400-011 DESCRIPTION The Batteryless Telephone Board 99400-001 is designed and produced by Jotron Phontech AS. The board is a plug-in module supporting switching facility for external signal device in the batteryless telephone system. The Relay board is compatible with BTS telephone types 4040 (Ver 05827), 4050, 4051, 4060 and 4061.
Need help?
Do you have a question about the Phontech BTS 4000 and is the answer not in the manual?
Questions and answers