Getting Started USB 2.0 Connector Sync-in On / Pulse Switch WiFi SMA Connector 8x 6-pin LEMO SMA Connector Connectors ON LED Indicator STATUS LED Pulse LED Indicator Sync-out Power Switch SMA Connector GPS SMA Connector RJ45 Ethernet Connector Connecting your Constellation Access Point Important Turn the power switch off before connecting or disconnecting the AC Power Cable Step 1...
Page 5
Controlling your Constellation Access Point with a computer Your Constellation Access Point can be controlled through Veritas LED Control software via three methods; WiFi, Ethernet, and USB. A brief description of each method is described below: WiFi If using WiFi, connect the included WiFi antenna to the WiFi Antenna SMA Adapter and then to the WiFi SMA connector on the front of the Constellation Access Point.
Dimensions & Illustrations (Continued) Front View 216.20 8.512 42.85 31.75 1.687 1.250 29.37 Unit of measurement: 1.156 57.15 2.250 8.89 .350 Right Side View 199.94 7.872 173.52 6.832 151.64 39.62 15.11 5.970 Ă 1.560 .595 AIR EXHAUST 113.58 DO NOT BLOCK 4.472 Unit of measurement: 25.08...
Need help?
Do you have a question about the Constellation series and is the answer not in the manual?
Questions and answers