Advertisement
SPOT CLEANING
Unplug and remove the control unit. Wet sponge the affected area using a
mild soap and luke warm water. Ensure the water temperature is less than 30
degrees Celsius. Gently sponge the affected area with new clean water and
use a white coloured towel to absorb excess moisture.
Hand wash only
Do not bleach
Line Dry/hang to dry – hang damp from line or bar and allow to dry
Do not iron or press with heat
Do not dry clean
MAINTENANCE
Always check that the blanket is I god working order before use.
Check the controller, power supply cord and plug frequently for cuts
and damage.
Do NOT attempt to service this blanket. There are NO user
serviceable parts. If it is faulty in anyway, return it to the retailer
immediately.
This electric blanket should be checked annually by a suitably
qualified person to ensure its safety and suitability for use.
When not in use, store your blanket and instruction manual in a safe
and dry place.
Advertisement
