Related Manuals for iCES ISCD-36
Summary of Contents for iCES ISCD-36
- Page 1 www.ices-electronics.com...
-
Page 2: Table Of Contents
CONTENT 1. PRECAUTIONS………………………………………………………………01 2. MAINTENANCE………………………………………………………………02 3. SPECIFICATION……………………………………………………………...02 4. PARTS NAME AND FUNCTIONS………………………………………..02 4.1PARTS ON THE FRONT OF THE PLAYER............4.2 PARTS ON THE LEFT SIDE OF THE PLAYER..........03 …………………………………….. 4.3 PARTS ON THE REAR OF THE PLAYE 4.4PARTS ON THE RIGHT OF THE PLAYER……………………………...…………04 5.CHOOSING THE POWER SOURCES ............ -
Page 3: Precautions
1. PRECAUTIONS Thank you for purchasing CD player. Please read this manual carefully before operating and reserve it for future reference. It will be helpful to you if you encounter any operational problem. On Safety A s the laser beam used in the CD player section may be harmful to the eyes, do not ·... -
Page 4: Maintenance
2. MAINTENANCE Cleaning the Lens If the lens becomes dirty, it may cause a skipping of sound during CD operation. Clean with a commercially available lens cleaner and blower. Cleaning the Cabinet Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. -
Page 5: Parts On The Left Side Of The Player
1. Random :random play 2. NEXT:skip next track; Press and hold the button to fast forward play during play mode 3. PREV:Press this once to return the start of the current track;Press this twice within one second to skip previous track ; Press and hold the button to fast backward play during play mode 4. -
Page 6: Parts On The Rear Of The Playe
4.3 Parts on the rear of the main unit 1. Audio input Input audio signal 2. AC socket 4.4 Parts on the right side of the player 1. Tuning control 2. FM MONO/STEREO Switch 3. Display FM frequency 5.CHOOSING THE POWER SOURCES You ca use the AC power or batteries as a power source. -
Page 7: Playing A Cd
· R eplace the batteries when the POWR lamp dims or when the player stops operating. Replace all the batteries with new ones.Before you replace the batteries,be sure to take out the CD from the player. · I f the CD does not play on batteries, this means the batteries are almost used up.But the radio may continue to play on these weak batteries because it uses less power than the CD player. -
Page 8: Programmed Play
7.2 Programmed play In STOP mode,you can make a program of up to 20 tracks in the order you want them to be played. (1) Slide the FUNCTION switch to CD/AUX IN position,Make sure the CD is stopped. (2) Press the PROGRAM button. The program number "o1" will flash in the display. (3) Press the PREV/NEXT button to select the desired track,and press the PROGRAM button to confirm. -
Page 9: Listening To The Radio
10.LISTENING TO THE RADIO (1) Connect the supplied AC power cord or batteries. (2) Slide the FUNCTION switch to RADIO position,the POWER lamp will turn on. (3) Slide the FM MONO/STEREO switch to the proper position that you want. (4) Tune into the station you prefer using the TUNING control.Adjust for the clearest sound. -
Page 10: Trouble Shooting
11. Trouble shooting Please refer the following instruction when there are some problems with this unit. If the problem still exits, please consult your nearest service center... -
Page 11: Service And Support
In case your device needs repair, our helpdesk will redirect you to your local dealer. ICES offers service and warranty in accordance to European law, which means that in case of repair (both during and after the warranty period), you should contact your local dealer. - Page 12 Products with the CE marking comply with the EMC Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Community. declaration conformity consulted http://www.stl.nl/supportfiles/ices/CE/iskjuhg8o73tyfsdr6tfr6.pdf ®All rights reserved...
Need help?
Do you have a question about the ISCD-36 and is the answer not in the manual?
Questions and answers