Summary of Contents for Advanced Avionics HyperBlast
- Page 1 A D V A N C E D A V I O N I C S , I N C . HyperBlast Battery Charger Users Guide 2006-2008 Advanced Avionics, Inc. All Rights Reserved 6118 Gotfredson Rd.. • Plymouth, MI 48170 Phone 734.332.0256 • Fax 734.418-2017...
- Page 2 Warranty and Warnings he standard LaserBlast warranty includes all parts and labor for a period of one year from the date of delivery. Shipment to Advanced Avionics, Inc. is the responsibility of the customer. Advanced Avionics will pay for return shipment in the same manner as the item was shipped to Advanced Avionics.
- Page 3 Advanced Avionics, Inc. LaserBlast charger. Use of any other charger may cause heat generation, explosion, or fire. 5. Do not throw or drop the battery. Strong impact may damage the protecting device, which may cause an abnormal chemical reaction and result in heat generation, explosion, or fire.
- Page 4 • Do not put anything on top of a battery charger. • Allow a 2” space at the rear of the charger for airflow to release heat.. • Only connect Advanced Avionics Inc. Laser Blast batteries – NEVER anything else.
- Page 5 Basic Use of the Charger The LaserBlast HyperBlast Charger has several safeguards to prevent overcharging and maximize the life of your batteries. On batteries with 3 leads, the charger will monitor the temperature of the battery and shut down over 50 deg. C.
- Page 6 The HyperBlast charger can be used in either 110 volt 60 hz countries, or in 220 Volt 50 Hz countries. It is very important to set the 110/220 switch on the rear of the unit to the correct voltage. Failure to set this correctly will destroy the charger. If your charger does not have this 110/220 switch, then it will autodetect the correct voltage.
- Page 7 Hypertronics connector is broken. Repair of the Charger The LaserBlast HyperBlast Charger was designed to allow the end user to replace the pigtail cables if the Hypertronics connector is broken. All other repairs should be referred to a qualified service technician.
Need help?
Do you have a question about the HyperBlast and is the answer not in the manual?
Questions and answers