Page 2
Rattle Boogie'. With a circuit designed by Christian Livingstone for use on the 'Death Rattle Boogie' LP, the Death Rattle Fuzz is a fabulous and versatile fuzzbox with a number of convenient features that ensure compatibility with a variety of guitar setups.
Page 3
LED - indicates effect on/off Foot switch - effect on/off (true bypass) NOTE: The Death Rattle Fuzz has a high input impedance and a low output impedance. This makes the Death Rattle Fuzz, unlike many fuzz pedals, compatible with buffered bypass pedals as...
OPERATING INSTRUCTIONS Connect a lead from your guitar to the input jack. Connect a lead from the output jack to your amplifier. Make sure a battery is fitted, or a 9V DC centre negative adapter is connected to the power-in socket. To change the battery remove the four screws on the back of the pedal.
OPERATING INSTRUCTIONS Volume: Controls the overall output of the pedal. Texture: Alters the bias of the fuzz transistors. It is recommended to start with the Texture control turned all the way to the right. In this position you will achieve the "correct"...