Table of Contents
Advertisement
10
TUNING THE CHASSIS
–
Mount the screws with the washer on the left and right sides of the vehicle but do
not tighten yet.
B01319-01
–
Remove screws
–
Push up on the subframe until the drilled holes of the frame are aligned with the
holes at the bottom rear of the subframe.
B01318-11
–
Tighten screws
Guideline
Screw, subframe
B01318-12
with the washers on the left and right sides of the vehicle.
3
on the left and right sides of the vehicle.
3
M8
20 Nm
Loctite
®
243™
(14.8 lbf ft)
152
Advertisement
Table of Contents
