Samsung 750 User Manual page 22

Storing Channels in Memory (Automatic Method)
1 Press the MENU button to display the menu.
Press the or button to select Channel, then press the ENTER button.
2 Press the or button to select Auto Program, then press the ENTER
button.
3 Press the or button to select an antenna connection, then press the
ENTER button.
Air: Air antenna signal.
Cable: Cable antenna signal.
Auto: Air and Cable antenna signals.
4 When selecting the Cable TV system:
Press the ENTER button to start the auto program.
Press the or to select the correct analog signal cable system source
among STD, HRC, and IRC, then press the ENTER button. If you have Digital
cable TV, select the cable system signal source for both Analog and Digital.
STD, HRC, and IRC identify various types of cable TV systems.
Contact your local cable company to identify the type of cable system
that exists in your particular area. At this point the signal source has been
selected.
5 The TV begins memorizing all available stations.
After all the available channels are stored, it starts to remove scrambled
channels (see page 47). The Auto program menu then reappears.
If you want to stop Auto Programming, press the ENTER button.
The Stop Auto Program? message will be displayed. Select Yes by
pressing the or
Press the EXIT button to exit.
button, then press the ENTER button.
English - 22
Antenna : Air
Auto Program
Channel List
Clear Scrambled Channel
Fine Tune
Signal Strength
Auto Program
Select the antennas to memorize.
Air Start
Cable
Start
Auto Start
Move Enter Return
Auto Program
Select the cable system.
Analog STD HRC IRC
Digital
STD HRC IRC
Start
Move Enter Return
Auto Program
Auto Program in Progress.
DTV Air : -- Air : 3
DTV Cable : -- Cable : --
Air 3
3%
Stop
Enter Return
Auto Program
Auto Program is incomplete.
3 channels are memorized.
Air : 3 Cable : 0
OK
Enter Return