Advertisement
Quick Links
please read these instructions carefully and save this manual for future use.
Precautions
Refer installation work to the dealer.
Installation work requires technique and experience. Failure to observe this may cause fire, electric
shock, injury, or damage to the product.
Be sure to consult the dealer.
Mounting procedures
Note:
When a smoke type dome cover is used, the IR LED irradiation distance and the illuminance level
●
for switching between color and monochrome are lower than for a standard clear type dome
cover. Check the settings after attaching the enclosure.
Attach to WV-SFN631L/WV-SFN611L
n
Read the following descriptions together with the Installation Guide of the camera. The WV-SFN631L
is used as an example in these descriptions.
Remove the enclosure from camera
Step1
Use the bit included with the camera to
loosen the 2 screws that secure the
enclosure, and then remove the enclo-
sure from the camera body.
Before attempting to connect or install this product,
The model number is abbreviated in some descriptions in this manual.
Operating Instructions
Model No.
Enclosure fixing
screws (x2)
Enclosure
Camera body
Included Installation Instructions
Dome Cover
WV-CF5SA
Advertisement
Related Manuals for Panasonic WV-CF5SA
Summary of Contents for Panasonic WV-CF5SA
-
Page 1: Dome Cover
Operating Instructions Included Installation Instructions Dome Cover WV-CF5SA Model No. Before attempting to connect or install this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual. - Page 2 Replace the dome cover Step3 1 Remove the cover film from the outside of the dome cover (WV-CF5SA). Keep the removed cover film for future use. (Take care not to damage the outside or inside of the dome cover.) 2 Attach the dome cover (WV-CF5SA) to the enclosure. When attaching, align the 3 notched areas on the dome cover with the 3 protrusions on the case ring.
- Page 3 If there are fingerprints or dirt on the dome cover, wipe it clean with a soft cloth. ● Attach to WV-SF538/WV-SF539 and other models Models that can use the WV-CF5S dome cover can also use the WV-CF5SA dome cover. Read the following descriptions together with operating instructions of the camera. Step1 Remove the enclosure from camera 1 Remove the enclosure fixing screw (M3, step screw).
- Page 4 Remove the clear dome cover Step2 1 Remove the inner dome cover and clear dome cover from enclosure's stoppers. The inner dome cover and clear dome cover can be removed by releasing the stoppers and then pushing the inner dome cover and clear dome cover into the enclosure. Push Stoppers (x3) 2 Remove 1 stopper at a time while pushing down on the inner dome cover.
- Page 5 Step3 Attach the dome cover (WV-CF5SA) 1 Align the inner dome cover's 3 stoppers with notched areas of the dome cover. 2 Insert the dome cover and inner dome cover into the enclosure and make sure that they are stuck in with the stoppers on the enclosure.
-
Page 6: Specifications
Step4 Attach the enclosure to the camera Attach the enclosure to the main body of the camera. Refer to the operating instructions of each model for information. Specifications Ambient operating temperature: –10 °C to +50 °C {14 °F to 122 °F} Approx. - Page 8 Two Riverfront Plaza, Newark, NJ 07102-5490 Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 www.panasonic.ca © Panasonic System Networks Co., Ltd. 2014 PGQX1553ZA Cs0214-0 Printed in China...