Advertisement
ENFORCER HDMI Surge Protector
Introduction:
The ENFORCER HDMI Surge Protector is a passive device that helps protect sensitive HDMI
equipment from power surges. The device can be deployed in new installations or existing
ones.
The ENFORCER HDMI Surge Protector should be installed between HDMI equipment such as
players, monitors, and projectors to protect against surges that could damage the video
equipment.
NOTE: For the best protection, installing two surge protectors is recommended: one at each
end of the cable.
Parts List:
1x HDMI Surge Protector
1x Manual
Specifications:
ESD protection
EFT protection
Surge protection
Surge reaction speed
Connector
Dimensions
Weight
Material
Operating temperature
Overview:
Unprotected
End
*
Note: There is a 'Grounding Wire Attachment Location' included on both ends of the HDMI Surge
Protector. Grounding wire can be attached to either of these locations.
2
2x Mounting screws
2x Plastic wall anchors
In
Out
1" (26mm)
To HDMI
Input
1" (26mm)
15kV (ESD), 8kV (Contact)
2
/
"x1"x1" (56x26x26 mm)
3
16
32°~131°F (0°~55° C)
2
/
" (56mm)
3
16
To HDMI
Output
1x 12" (30cm) grounding wire
1x Grounding wire screw
40A (5/50ns)
5A (8/20ns)
<1ns
HDMI
HDMI
1.2-oz (35g)
Aluminum
Grounding Wire
Attachment Location
(One on each end)
SECO-LARM U.S.A., Inc.
*
Protected
End
Advertisement
