Table of Contents
Advertisement
e_kb359.book Page 38 Friday, August 8, 2003 4:15 PM
If you take a picture while looking through the viewfinder when the
focus mode is set on Macro and Super Macro, the range of the
resulting picture will differ from what was seen in the viewfinder.
Be sure to check the image on the LCD monitor.
Manual Focus
When the mode is set to
to full screen on the LCD monitor for focus adjustment. Use the four-way
controller to adjust the focus while watching the indicator on the monitor.
For distant focus
4
For closer focus
After the focus is set, press any buttons except the four-way controller
(
) or take a finger off from the four-way controller (
23
returns to the normal display two seconds later.
The central portion of the picture is not enlarged when the digital
zoom is enabled.
Changing the Focusing Point
In autofocus mode, you can change the focusing point by moving the
autofocus area.
1
In Focusing area mode, press the four-way controller
(
) to move the autofocus area ([ ]).
2345
2
Press the shutter release button.
To return the autofocus area to its original location, press the q s z
button again.
38
, the central portion of the picture is enlarged
z
Saving the Focus Mode
). The screen
23
p.74
1
Advertisement
Table of Contents
