1. Manuals
  2. Brands
  3. Axel Manuals
  4. IP Phone
  5. PHONEX-D1
  6. User manual

Axel PHONEX-D1 User Manual

2 line digital telephone hybrid
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PHONEX-D1
PHONEX-D2
User Manual
2 Line Digital
Telephone Hybrid
(Rev. 3.0 EN)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PHONEX-D1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Axel PHONEX-D1

  • Page 1 PHONEX-D1 PHONEX-D2 User Manual 2 Line Digital Telephone Hybrid (Rev. 3.0 EN)

  • Page 2: Table Of Contents

    CONTENT INTRODUCTION ................................. 4 ..............................4 MAIN FEATURES .............................. 4 USE OF THIS MANUAL 2 – ................... 5 PHONEX D AND PHONEX D DEPLIANT AND BROCHURE SAFETY WARNINGS / ISTRUZIONI PER LA SICUREZZA ..................9 FOREWORD ............................... 9 SAFETY WARNINGS ............................... 10 CONSIGNES DE SÉCURITÉ...
  • Page 3 15.12 -1 ..................65 CONNECTION TO A NON BROADCAST MIXING CONSOLE 15.13 -2 ..................66 CONNECTION TO A NON BROADCAST MIXING CONSOLE 15.14 -1 ......................67 CONNECTION TO A DIGITAL LINE OR VOIP 15.14.1 What is a A.T.A device? .............................. 67 15.15 -2 ......................

  • Page 4: Introduction

    1 INTRODUCTION PHONEX D1 - PHONE X D2 AVAILABLE VERSION CODE# ARTICLE DESCRIPTION Digital studio telephone hybrid 1 line PSTN/POTS. Audio A112100000 PHONEX D1 process DSP-Based, XLR analog and AES/EBU input and output.DTMF decoder and GPIN/GPOUT port. Graphic LCD display for TX and RX level monitoring. 1 GSM module for wireless operation (opz).USB and Serial port.

  • Page 5: Phonex D1 And Phonex D2 - Depliant And Brochure

    1.3 PHONEX D1 AND PHONEX D2 – DEPLIANT AND BROCHURE PhoneX D1 PhoneX D2 BROADCAST SERIES DIGITAL TELEPHONE HYBRIDS HIGHLIGHTS Digital Telephone hybrid based on DSP audio process Management of 1 or 2 pots/pstn line and GSM QuandBand Audio controls: AGC Stage, Echo canceller, De-Noiser, 2Band Eq, Ducking Hold and Attenuator features on calls Auto-answer and disconnection features Integrated DTMF dialer via software and webpage.
  • Page 6 MAIN DESCRIPTION PhoneX D1 and PhoneX D2 are telephone hybrid designed for Broadcast marketplace. The internal frameworks based on DSP (Digital Signal Processor) hit in realtime the highest audio performances, that sets PhoneX D1 and PhoneX D2 as state-of-art technology in telephone interface. As in Macrotel X1 and X2, the PhoneX D1 and D2 equipments allows to manage one or two landlines, shared with GSM QuadBand modem optionally improved, to place phone calls where wired lines are not available.
  • Page 7 TECH SPECS PhoneX D1 – PhoneX D2 General Features PhoneX D1 PhoneX D2 End User / Price List 1.290 € 1.700 € Lines 1 Pots/Pstn Line or 2 Pots lines or 1 GSM Line (by option) 2 GSM lines (by option) or 1 Pots line + 1 GSM line (by option) Phone Line 1x RJ11 6/4...
  • Page 8 COMPARISON TABLE General Features Macrotel X1 Macrotel X2 PhoneX D1 PhoneX D2 End User / Price List Telephone Lines 1 Pots/Pstn line or 2 Pots/Pstn lines or 1 Pots/Pstn line or 2 Pots/Pstn lines or Configuration 1 GSM line 2 GSM Lines or 1 GSM line 2 GSM Lines or 1 Pots line + 1 GSM line...

  • Page 9: Safety Warnings / Istruzioni Per La Sicurezza

    1 SAFETY WARNINGS / ISTRUZIONI PER LA SICUREZZA SAFETY WARNINGS CONSIGNES DE SÉCURITÉ IMPORTANTES ISTRUZIONI IMPORTANTI PER LA SICUREZZA WICHTIGE SICHERHEITSHINWEISE INSTRUCCIONES IMPORTANTES DE SEGURIDAD (Rel. 2.0) 1.1 FOREWORD For your own safety and to avoid invalidation of the warranty all text marked with these Warning Symbols should be read carefully.

  • Page 10: Safety Warnings

    2 SAFETY WARNINGS The installation and servicing instructions in this manual are for use by qualified personnel only. - Read All Instructions. All safety and operating instructions must be read before operating the product. They also must be retained for future reference, as it contains a number of useful hints for determining the best combination of equipment settings for Yr particular application.

  • Page 11: Consignes De Sécurité Importantes

    CONSIGNES DE SÉCURITÉ IMPORTANTES - Lire ces consignes - Conserver ces consignes - Observer tous les avertissements - Suivre toutes les consignes - Ne pas utiliser cet appareil à proximité de l’eau - Ne pas obstruer les ouvertures de ventilation. Installer en respectant les consignes du fabricant - Ne pas installer à...

  • Page 12: Istruzioni Importanti Per La Sicurezza

    4 ISTRUZIONI IMPORTANTI PER LA SICUREZZA - Leggere le presenti istruzioni - Conservare queste istruzioni - Osservare tutte le avvertenze - Seguire scrupolosamente tutte le istruzioni - Non usare questo apparecchio in prossimità di acqua - Non ostruire alcuna apertura per il raffreddamento. Installare l’apparecchio seguendo le istruzioni - Non installare l'apparecchio accanto a fonti di calore quali radiatori, aperture per l'afflusso di aria calda, forni o altri apparecchi (amplificatori inclusi) che generino calore - Non rimuovere il terminale di connessione a terra sul cordone di alimentazione: esso ha lo scopo di tutelare...

  • Page 13: Wichtige Sicherheitshinweise

    5 WICHTIGE SICHERHEITSHINWEISE - Diese Hinweise LESEN - Diese Hinweise AUFHEBEN - Alle Warnhinweise BEACHTEN - Alle Anweisungen BEFOLGEN - Dieses Gerät NICHT in der Nähe von Wasser verwenden - KEINE Lüftungsöffnungen verdecken. Gemäß den Anweisungen des Herstellers einbauen - Nicht in der Nähe von Wärmequellen, wie Heizkörpern, Raumheizungen, Herden oder anderen Geräten (einschließlich Verstärkern) installieren, die Wärme erzeugen - Die Schutzfunktion des Schukosteckers NICHT umgehen.
  • Page 14 Inpoliger Netzschalter. In Notfälle oder für Wartungsarbeiten Netzkabel trennen. Der Netzstecker fungiert auch als Trennelement muss deshalb zugänglich bleiben | WICHTIGE SICHERHEITSHINWEISE...

  • Page 15: Instrucciones Importantes De Seguridad

    6 INSTRUCCIONES IMPORTANTES DE SEGURIDAD - LEA estas instrucciones - CONSERVE estas instrucciones - PRESTE ATENCION a todas las advertencias. - SIGA todas las instrucciones - NO utilice este aparato cerca del agua - NO obstruya ninguna de las aberturas de ventilación.Instálese según lo indicado en las instrucciones del fabricante - No instale el aparato cerca de fuentes de calor tales como radiadores, registros de calefacción, estufas u otros aparatos (incluyendo amplificadores) que produzcan calor...
  • Page 16 El interruptor de alimentación es unipolar. En el caso de peligro, desconecte el cable de alimentación. Porque la clavija de conexion a red sirve por la desconection de la unidad, la clavija debe ser ubicada en proximidad de la unidad | INSTRUCCIONES IMPORTANTES DE SEGURIDAD...

  • Page 17: Unpacking And Inspection

    UNPACKING AND INSPECTION 7 UNPACKING AND INSPECTION Your equipment was packed carefully at the factory in a container designed to protect the unit during shipment. Nevertheless, we recommend making a careful inspection of the shipping carton and the contents for any signs of physical damage.

  • Page 18: First Installation Recommendations

    FIRST INSTALLATION RECOMMENDATIONS 8 FIRST INSTALLATION RECOMMENDATIONS 8.1 POWER SUPPLY CABLE A power supply cable of approx. 2 mt length is supplied with the device, which has a moulded IEC plug attached – this is a legal requirement. The type of plug for the power supply depends on the country in which it is delivered. If for any reason, you need to use this appliance with a different plug, you should use the following wiring guidelines in replacing the existing plug with the new one: Earth...

  • Page 19: Fuse Replacement

    FIRST INSTALLATION RECOMMENDATIONS 8.3 FUSE REPLACEMENT The power supply socket has an integral fuse drawer containing the AC power fuse and a spare, both of the same value.  BEFORE REPLACING THE POWER FUSE, MAKE SURE YOU HAVE THE RIGHT TYPE OF FUSE FOR THE VOLTAGE TO BE PROTECTED.

  • Page 20: Protection Against Lightning

    Axel Technology suggest to don’t touch never this parts, and it is not responsible for human flash light or electrical burns. Should the device be put out of action due to being struck by lightning or excess voltage, disconnect it from the power supply without delay.

  • Page 21: Ventilation

    FIRST INSTALLATION RECOMMENDATIONS 8.5 VENTILATION The equipment will operate as a free-standing unit without requiring any special cooling arrangement. However, slots and openings in the product are provided for ventilation. They ensure reliable operation of the product, keeping it from overheating. These openings must not be blocked nor covered during operation. YOU MUST LEAVE AT A MINIMUM ONE RACK UNIT OF EMPTY SPACE ABOVE THE EQUIPMENT TO ENHANCE VENTILATION AND TO GET A LONGER EQUIPMENT LIFE.

  • Page 22: Phonex D1 And Phonex D2 General Description

    PHONEX D1 AND PHONEX D2 GENERAL DESCRIPTION 9 PHONEX D1 AND PHONEX D2 GENERAL DESCRIPTION 9.1 PHONEX D1 FRONT PANEL N° FUNZIONE NOME CONTROLLO LCD Display that shows the status and operating mode of PhoneX- DISPLAY LCD D1. The technical parameters of each menu are displayed here Knob (or JogShuttle) to access the various navigation menus and JOG-SHUTTLE make changes.

  • Page 23: Phonex D1 Rear Panel

    “USB” PORT connect the USB A/B from the PC to the PhoneX D1, please install the Axel Telephone Hybrid Remoter that install also the USB driver into the OS. PhoneX is fitted with an Rj45 Ethernet port to monitor and control the...
  • Page 24 PHONEX D1 AND PHONEX D2 GENERAL DESCRIPTION - GPI Status - GPO Status As regards the Opto Interface port pinout see the Appendix at the end of this manual. For the operation of each GPI and GPO see the specific section in the next pages of this manual. Electronically balanced analog audio output of the second hybrid, on ANALOG OUTPUT Balanced XLR connector, Mono type.

  • Page 25: Phonex D2 Front Panel

    PHONEX D1 AND PHONEX D2 GENERAL DESCRIPTION 9.3 PHONEX D2 FRONT PANEL FUNZIONE N° NOME CONTROLLO LCD Display that shows the status and operating mode of PhoneX- DISPLAY LCD D1. The technical parameters of each menu are displayed here Knob (or JogShuttle) to access the various navigation menus and JOG-SHUTTLE make changes.

  • Page 26: Phonex D2 Rear Panel

    “USB” PORT connect the USB A/B from the PC to the PhoneX D2, please install the Axel Telephone Hybrid Remoter that install also the USB driver into the OS. PhoneX D2 is fitted with an Rj45 Ethernet port to monitor and control...
  • Page 27 PHONEX D1 AND PHONEX D2 GENERAL DESCRIPTION “GPIO” PORT Interface with 15 pin female HD SubD connector. Determines the PhoneX D2 logic status via the GPOut open collector, while it provides the PhoneX D2 command via GPIn, thanks to the opto couplers installed.

  • Page 28: Installation And Use Of The Control Software

    Windows 8 Pro 64bit. The control software must be installed before connecting the devices to the USB port. To install the program follow the instructions below using the program file from the original CD contained in the package with the device, or the file downloaded from the Axel Technology website. Procedura di Installazione: Insert the CD in the player Run SETUP.EXE...
  • Page 29 The two icons refer to the programs: Axel Telephone Hybrid Remoter v2.0.x Axel Telephone Hybrid Address Manager v2.0.x At this point the programs can be used to manage the PhoneX device. The following chapters describe the connection procedures and product potential.

  • Page 30: Use Of The Phonex Address Manager Software

    USE OF THE PHONEX ADDRESS MANAGER SOFTWARE 11 USE OF THE PHONEX ADDRESS MANAGER SOFTWARE The PhoneX Address Manager software assigns a TCP/IP address, the relevant Subnet Mask, a Gateway and a port to PhoneX. This is obtained using the PC’s serial port on which PhoneX Address Manager is installed and the SERIAL-1 port of the PhoneX device.

  • Page 31: Use Of Telephone Hybrid Remoter

    USE OF TELEPHONE HYBRID REMOTER 12 USE OF TELEPHONE HYBRID REMOTER Start window of the PhoneX control software 12.1 ACCESS VIA SERIAL CONNECTION To operate on the PhoneX, after having allocated the serial port and TCP/IP values it is necessary to use the PhoneX Remoter program by clicking the special icon.

  • Page 32: Access Via Tcp/Ip Connection

    USE OF TELEPHONE HYBRID REMOTER 12.2 ACCESS VIA TCP/IP CONNECTION To access and manage the device via TCP/IP follow the simple instructions below. Unlike a serial connection, a TCP/IP connection is extremely useful when more than one unit must be managed. In this way it is possible to connect to PhoneX devices and manage each one in remote mode from one single point.

  • Page 33: Manage Phonex D1 And Phonex D2 Via Software

    13 MANAGE PHONEX D1 AND PHONEX D2 VIA SOFTWARE Axel Telephone Hybrid Remoter is a program to manage and control PhoneX both locally (via serial connection) and remotely via TCP/IP connection. As regards the monitoring functions, the front panel also shows the Send and Receive levels and primary functions such as line hook, ducking, attenuation and hold.
  • Page 34 MANAGE PHONEX D1 AND PHONEX D2 VIA SOFTWARE A Web Server is also available inside the device to display data via Web browser, such as Mozilla, Internet Explorer or Google Chrome. Once you have accessed the PhoneX device the following screen will appear: | MANAGE PHONEX D1 AND PHONEX D2 VIA SOFTWARE...

  • Page 35: Telephone Hybrid Remoter Detail

    TELEPHONE HYBRID REMOTER DETAIL 14 TELEPHONE HYBRID REMOTER DETAIL 14.1 PHONEX D1 CONTROL SOFTWARE DESCRIPTION The PhoneX D1 control software (Telephone Hybrid Remoter) is basically divided into 4 parts: Hybrid 1 section Levels section GPI / GPO status section Setup & Disconnect section 14.2 HYBRID 1 SECTION The “Hybrid 1 Section”...

  • Page 36: Livel Section

    TELEPHONE HYBRID REMOTER DETAIL ATTEN: when ATTEN is pressed via software or via GPIn connection, a dB reduction equal to the Ducking value set in the control software is applied to the Receive signal: HOLD: when HOLD is pressed via software the Receive volume is taken to –infinity without closing the call.

  • Page 37: Gpio Status Section

    TELEPHONE HYBRID REMOTER DETAIL 14.4 GPIO STATUS SECTION The GPI / GPO Status section shows the status of the General Purpose Input and Output status. The 25 pin female SubD port on the back of the device is used to connect the device; see the technical appendix for the connections and the pinout.

  • Page 38: Hybrid 1 Section

    TELEPHONE HYBRID REMOTER DETAIL 14.5.1 Hybrid 1 section In this section all the parameters relating to the Telephone Hybrid 1 (Hybrid 1) can be set INPUT SOURCE: This is the input of the Hybrid 1, i.e. what is sent (SEND) to the telephone interlocutor.
  • Page 39 TELEPHONE HYBRID REMOTER DETAIL Echo Tail: this is the value in ms of the Echo that is eliminated by the PhoneX DSP. It is used together with the Echo Cancelling command that controls the cancellation speed of the Echo on the telephone line. This parameter acts on an automatic variation filter to cancel the echo.

  • Page 40: Outputs Section

    TELEPHONE HYBRID REMOTER DETAIL Ducking & Attenuation: In this section the attenuation values can be adjusted from 1dB to 30dB. This section includes the ducking function (with On/Off action), which attenuates the input signal from the line of the value set in the Attenuation parameter, when the input level to the line is higher than the threshold set.
  • Page 41 TELEPHONE HYBRID REMOTER DETAIL DIGITAL OUTPUT Nominal Output Level: This parameter changes the nominal level of the AES/EBU output. Range of allowed values: from -24.0 dBFs to a maximum of -5.0 dBFs. This parameter can be used to change the digital output of Hybrid 1 and Hybrid 2.

  • Page 42: Program Settings Section

    Setup section. If you forget the password the device must be returned to the manufacturer in order to be used again. There are no backdoors and Axel Technology’s Technical Assistance Service is not authorised to instruct others to tamper with the device.
  • Page 43 TELEPHONE HYBRID REMOTER DETAIL Serial2 Setup: this setup allows the PhoneX D1 to use the Serial -2 as a common Serial port or a port where the GSM module can be connected. In any case ASCII parser data can be sent to the PhoneX D1. UNDO: press UNDO to reset the values set in the whole Hybrid 1 and Outputs section to the values set on the device before the opening of the control panel.

  • Page 44: Phonex Control Software Description

    TELEPHONE HYBRID REMOTER DETAIL 14.6 PHONEX CONTROL SOFTWARE DESCRIPTION Phonex control software description The PhoneX control software (PhoneX Remoter) is basically divided into 5 parts: Hybrid 1 section Hybrid 2 section Levels section GPI / GPO status section Setup & Disconnect section 14.7 HYBRID 1 SECTION The “Hybrid 1 Section”...

  • Page 45: Hybrid 2 Section

    TELEPHONE HYBRID REMOTER DETAIL DIAL: when DIAL is pressed the DTMF dialler opens. Dial the number using the numerical keyboard of your PC and then click ON HOOK. In this way the DTMF dials the number to be called on the telephone line. The Latest 10 Calls section displays the last ten calls;...

  • Page 46: Gpi Status Function

    TELEPHONE HYBRID REMOTER DETAIL 14.10.1 GPI status function HOOK 1: this is used to hook, by means of a stable contact, the telephone line of Hybrid 1; it is usually connected to the TELCO (N-1) modules of the Broadcast Mixing consoles that feature a GPO contact to answer incoming calls directly from the telephone fader.
  • Page 47 TELEPHONE HYBRID REMOTER DETAIL INPUT SOURCE: This is the input of the Hybrid 1, i.e. what is sent (SEND) to the telephone interlocutor. The options available are: Analog, Digital Left, Digital Right and Microphone. The sensitivity levels of each input are shown at the side and are identified as follows. ANALOG SENSITIVITY: this is the sensitivity of the balanced analog input.
  • Page 48 TELEPHONE HYBRID REMOTER DETAIL Echo Tail: this is the value in ms of the Echo that is eliminated by the PhoneX DSP. It is used together with the Echo Cancelling command that controls the cancellation speed of the Echo on the telephone line. This parameter acts on an automatic variation filter to cancel the echo.
  • Page 49 TELEPHONE HYBRID REMOTER DETAIL Ducking & Attenuation: In this section the attenuation values can be adjusted from 1dB to 30dB. This section includes the ducking function (with On/Off action), which attenuates the input signal from the line of the value set in the Attenuation parameter, when the input level to the line is higher than the threshold set.

  • Page 50: Hybrid 2 Section

    TELEPHONE HYBRID REMOTER DETAIL 14.11.2 Hybrid 2 section In this section all the parameters relating to the Telephone Hybrid 2 (Hybrid 2) can be set INPUT SOURCE: This is the input of the Hybrid 2, i.e. what is sent (SEND) to the telephone interlocutor.
  • Page 51 TELEPHONE HYBRID REMOTER DETAIL Echo Tail: this is the value in ms of the Echo that is eliminated by the PhoneX DSP. It is used together with the Echo Cancelling command that controls the cancellation speed of the Echo on the telephone line. This parameter acts on an automatic variation filter to cancel the echo.
  • Page 52 TELEPHONE HYBRID REMOTER DETAIL Ducking & Attenuation: In this section the attenuation values can be adjusted from 1dB a 30dB. This section includes the ducking function (with On/Off action), which attenuates the input signal from the line of the value set in the Attenuation parameter, when the input level to the line is higher than the threshold set.

  • Page 53: Outputs Section

    TELEPHONE HYBRID REMOTER DETAIL 14.11.3 Outputs Section This section includes the parameters to change the output operating mode. It is divided into two sections: Digital Output and Analog Output DIGITAL OUTPUT Nominal Output Level: This parameter changes the nominal level of the AES/EBU output. Range of allowed values: from -24.0 dBFs to a maximum of -5.0 dBFs.

  • Page 54: Program Settings Section

    Setup section. If you forget the password the device must be returned to the manufacturer in order to be used again. There are no backdoors and Axel Technology’s Technical Assistance Service is not authorised to instruct others to tamper with the device.

  • Page 55: Phonex Connections

    PHONEX CONNECTIONS 15 PHONEX CONNECTIONS 15.1 TELEPHONE HYBRID CONCEPT The hybrid phone is a device capable of interfacing with a telephone line of audio lines. In practice, the audio signals sent toward the hybrid are received from the phone, and vice versa. The telephone hybrid is widely used in radio and television, as it allows you to create simple audio connections with remote locations in a very low cost.

  • Page 56: Connection To The Pots / Pstn Telephone Line

    PHONEX CONNECTIONS 15.3 CONNECTION TO THE POTS / PSTN TELEPHONE LINE CHECK that this device is connected to POTS / PSTN lines (analog) DO NOT CONNECT this device to digital telephone lines DO NOT CONNECT this device to ADSL lines, even if fitted with filter. To avoid any type of hum at 50 Hz and to comply with EMC requirements, the device must be connected to earth by means of the earthing screw on the rear panel or via the power supply cable.
  • Page 57 PHONEX CONNECTIONS If the unit has operating problems caused by lightening or over voltage, disconnect it immediately from the telephone line and electric power supply; do not reconnect it until the device has been duly checked. If in doubt contact the technical assistance service. Make sure also that your system is fitted with adequate lightening protection.

  • Page 58: Gsm Module 1 And Gsm Module 2 Wireless Connection

    PHONEX CONNECTIONS 15.4 GSM MODULE 1 AND GSM MODULE 2 WIRELESS CONNECTION Up to two GSM devices can be connected to PhoneX with mutual exchange between the POTS line and the GSM line. See the LINE TYPE section for the mute exchange of this line. The image below shows how to connect the GSM-1 AND GSM-2 modules.

  • Page 59: Gsm Module 1 And 2 Pots Lines Connection

    PHONEX CONNECTIONS 15.5 GSM MODULE 1 AND 2 POTS LINES CONNECTION Is it possible to connects to a PhoneX D2 one single GSM module and 2 POTS Lines. In any case, via software some configurations must be done. | PHONEX CONNECTIONS...

  • Page 60: Audio Connection To And From Phonex D1 And Phonex D2

    PHONEX CONNECTIONS 15.6 AUDIO CONNECTION TO AND FROM PHONEX D1 AND PHONEX D2 The PhoneX can be connected to other devices such as Mixers or digital consoles in different ways. PhoneX features two possible types of connections, the Single Mode or the Conference Mode. Both are detailed below. The following connections are available in Single Mode: Analog connection in Single Mode with one telephone line.

  • Page 61: Analog Connection In Single Mode With Two Telephone Lines (Phonex D2)

    PHONEX CONNECTIONS 15.8 ANALOG CONNECTION IN SINGLE MODE WITH TWO TELEPHONE LINES (PHONEX D2) In this mode the PhoneX device is connected to the console using an analog audio line. An audio signal from the Telco output of the mixer (N-1) for the first and second telephone lines is sent to the Send Hybrid 1 and Send Hybrid 2 of PhoneX.

  • Page 62: Digital Connection In Single Mode With One Telephone Line (Phonex D1)

    PHONEX CONNECTIONS 15.9 DIGITAL CONNECTION IN SINGLE MODE WITH ONE TELEPHONE LINE (PHONEX D1) In this mode the PhoneX device is connected to the console using a digital audio line. An audio signal from the Telco output of the mixer (N-1) for the first telephone line is sent to the Send Hybrid 1 of PhoneX. The conncetion must be done between the Telco Module and input 1C.

  • Page 63: Digital Connection In Single Mode With Two Telephone Lines (Phonex D2)

    PHONEX CONNECTIONS 15.10 DIGITAL CONNECTION IN SINGLE MODE WITH TWO TELEPHONE LINES (PHONEX D2) In this mode the PhoneX device is connected to the console using a digital audio line. An audio signal from the Telco output of the mixer (N-1) for the first and second telephone lines is sent to the Send Digital of PhoneX. The output is sent via Receive Digital to the Telco module relating to the Telephone Hybrid.

  • Page 64: Analog Connection, In Conference Mode, With Two Telephone Lines And Three Phonex

    PHONEX CONNECTIONS 15.11 ANALOG CONNECTION, IN CONFERENCE MODE, WITH TWO TELEPHONE LINES AND THREE PHONEX. This mode exploits the maximum modularity of the PhoneX device. All the hybrids are connected to each other in “cascade” and all the PhoneX devices can be controlled from the console simply using one single Telcon N-1 channel. The Conference mode on the Analog Output of each hybrid must be enabled to operate in this mode.

  • Page 65: Connection To A Non-Broadcast Mixing Console -1

    PHONEX CONNECTIONS CONNECTION TO A NON-BROADCAST MIXING CONSOLE -1 15.12 This way of connecting the Macrotel or Phonex telephone hybrid, allows the user to connect a “not broadcast” mixing console. In the example above this console not having all the functionality of a console "Broadcast" feature offers a service to connect directly to the telephone hybrid mixer.

  • Page 66: Connection To A Non-Broadcast Mixing Console -2

    This because it would create larsen and loops very annoying to listen to. In any case, Axel Technology is not responsible for damages caused to third parties for the improper use of non- broadcast mixing console. In the catalog of Axel Technology is possible to find solutions as a broadcast mixing console.

  • Page 67: Connection To A Digital Line Or Voip -1

    PHONEX CONNECTIONS 15.14 CONNECTION TO A DIGITAL LINE OR VOIP -1 It is not technically possible to directly connect a VoIP hybrid phone directly. You must insert between VoIP and Telephone Hybrid a A.T.A device 15.14.1 What is a A.T.A device? An Analog Telephone Adapter (ATA) (Analog Telephone Adapter) is a device used to connect one or more standard analog phones in order to use them with other systems such as the transport of voice over IP (VoIP) The ATA is provided by some VoIP providers in order to allow the user to connect their phone from the cable pulling the...

  • Page 68: Connection To A Digital Line Or Voip -2

    PHONEX CONNECTIONS 15.15 CONNECTION TO A DIGITAL LINE OR VOIP -2 In the event you need to connect a digital line to a hybrid phone, you must enter an ATA which means Analog telephone adapter, or an adapter between a digital line PSTN analog. Each manufacturer has its general, although some still exist generics on the market.

  • Page 69: Connection To A Digital Line Or Voip -3

    PHONEX CONNECTIONS 15.16 CONNECTION TO A DIGITAL LINE OR VOIP -3 In the event you need to connect a digital line to a hybrid phone, you must enter an ATA which means Analog telephone adapter, or an adapter between a digital line PSTN analog. Each manufacturer has its general, although some still exist generics on the market.

  • Page 70: Technical Appendix

    In case of differences between the documentation below and the hardware device please contact Axel Technology at the numbers and e-mail addresses shown at the end of this manual. Our technical and assistance department will be pleased to help you! 16.1 APPENDIX A –...

  • Page 71: Appendix C - Ethernet / Lan Connection

    TECHNICAL APPENDIX 16.3 APPENDIX C – ETHERNET / LAN CONNECTION 16.4 APPENDIX D – USB A/B CONNECTION | TECHNICAL APPENDIX...

  • Page 72: Appendix E - Gpio Port

    TECHNICAL APPENDIX 16.5 APPENDIX E – GPIO PORT The SubD connector 15pole HD GPIO place on the rear of PhoneX, provides 4 inputs General Purpose and 4 outputs General Purpose binary. The inputs are polarized on Opto coupler while the outputs are open collector. They can be used to send commands at the equipment and perform certain functions.

  • Page 73: Connection To Gpin And Gpout Via External Activation (Ttl)

    TECHNICAL APPENDIX 16.5.2 Connection to GPIn and GPOut via external activation (TTL) As shown in the diagram below, taking the voltage externally apparatus it is possible to polarize a photo coupler and implement one of the 4 GP Input available. Note: in this case the masses of the TTL signals generators are common. | TECHNICAL APPENDIX...

  • Page 74: Connection To Gpin And Gpout Via External Activation -2 (Ttl)

    TECHNICAL APPENDIX 16.5.3 Connection to GPIn and GPOut via external activation -2 (TTL) As shown in the diagram below, taking the voltage externally apparatus it is possible to polarize a photo coupler and implement one of the 4 GP Input available. Note: in this case the masses of the TTL signals generators are common. | TECHNICAL APPENDIX...

  • Page 75: Operative Example

    TECHNICAL APPENDIX 16.5.4 Operative Example | TECHNICAL APPENDIX...
  • Page 76 TECHNICAL APPENDIX For the function of each GPO see the Program Settings section, from where various functions can be assigned to the GPOs. For the purpose of each single GPO please refer to the Program Settings section in the Telephone Hybrid Remoter. For each single GPO these are the purposes: OFF –...

  • Page 77: Dtmf Remote Commands

    TECHNICAL APPENDIX 16.5.5 DTMF Remote commands Into the Program Settings section it is possible to find a special section designed for GPO and DTMF Decoder If the Checkbox DTMF Decoder is selected, PhoneX introduce a control and a DTMF decoder over the line numer ONE, into PhoneX D1 and over the line number ONE also in PhoneX D2 in the Receive side.

  • Page 78: Appendix F - Phonex Firmware Update

    APPENDIX F – PHONEX FIRMWARE UPDATE 17 APPENDIX F – PHONEX FIRMWARE UPDATE The most recent firmware version is installed by the manufacturer on PhoneX before it is delivered. Once purchase, the firmware can be updated with the latest version available. The Firmware Upgrade can be carried using the Windows operating system.
  • Page 79 APPENDIX F – PHONEX FIRMWARE UPDATE Select the PC serial port on the screen Shut Down the PhoneX D1 o PhoneX D2 Starts PhoneX D1 or PhoneX D2 within 3 seconds and press the CONNECT button Once the software is correctly connected to the PhoneX D1 and PhoneX D2 a screen like the following one is showned, and at the same time the front PhoneX display show no things and stay completely empty.

  • Page 80: Technical Specification Phonex D1 - Phonex D2

    TECHNICAL SPECIFICATION PHONEX D1 – PHONEX D2 18 TECHNICAL SPECIFICATION PHONEX D1 – PHONEX D2 GENERAL VALUE Dimension 434x351x44mm (1 rack unit) AC Rate 230Vac / 110Vac 50 Hz / 60 Hz 30VA Type of power supply Switching power supply Processing architecture Fully digital, based on DSP 24bit/100Mhz.

  • Page 81: Weee Directive - Informativa Raee

    WEEE Directive – Informativa RAEE 19 WEEE Directive – Informativa RAEE In line with EU Directive 2002/96/EC for waste electrical and electronic equipment (WEEE), this electrical product must not be disposed of as unsorted municipal waste. Please dispose of this product by returning it to the point of sale or to your local municipal collection point for recycling.

  • Page 82: Warranty

    To minimize the environmental impact and take more responsibility to the earth we live, in accordance with European Union Directive 2002/95/EC, known commonly as RoHS (Restriction of Hazardous Substances), We herewith declare, Axel Technology srl Via Caduti di Sabbiuno 6/F 40011 Anzola Emilia – Bologna - Italy...

  • Page 83: Final Note And Axeltechnolgy In Touch

    FINAL NOTE AND AXELTECHNOLGY IN TOUCH 22 FINAL NOTE AND AXELTECHNOLGY IN TOUCH ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________...

This manual is also suitable for:

Phonex-d2

Table of Contents