4. Close the back cover. Note: Please use the original external antenna if necessary. Connecting to Your Device A. Via Wi-Fi ) Power on your device directly. It will take ~ minutes to initialize. ) Use your normal Wi-Fi application on the client to search the available wireless network.
Page 4
Note: Please set the client to obtain an IP address automati- cally, and the client will get an IP address like“192.168.0.100”. 3) Select the SSID of your device, and then click Connect. ) Input the default password “1235678”, and then click Connect.
B. Via USB Cable ). Connect to the device. ). Power on your device. 3). Follow the system prompts to complete the software in- stallation. 4). Wait a moment, and then the client will connect to your device successfully. Accessing the Internet After successfully establishing the connection, access the Inter- net in the Always On mode. The default mode is Always On.
Mode Operations Your device will connect to the Internet automati- Auto- cally, and your clients can surf on the Internet matic directly. 1. Log in the 4G Mobile Hotspot page, and Select Settings > Network Settings > Dial- up Settings> WAN Connection Mode > Manual Manual, and then click Apply.
Page 7
. Right-click Wireless Network Connection, and then select Properties.
Page 8
3. Select Internet Protocol (TCP/IP), and then click Prop- erties. 4. Select Obtain an IP address automatically and Obtain DNS server address automatically, and then click Ok to finish the configuration.
Warning and Notice To the Owner • Some electronic devices are susceptible to electromag- netic interference sent by your device if inadequately shielded, such as the electronic system of vehicles. Please consult the manufacturer of your device before using if necessary. • Operating of laptop and desktop PCs and your device may interfere with medical devices like hearing aids and pacemakers. Please always keep them more than 0 centimeters away from such medical devices when they...
• Do not touch the metallic parts of your device so as to avoid a burn, when your device is working. Using Your Device • Please use original accessories or accessories that are authorized. Using any unauthorized accessories may affect your device’s performance, and violate related na- tional regulations about telecom terminals. • Avoid using your device near or inside metallic structures or establishments that can emit electromagnetic waves. Otherwise it may influence signal reception. • Your device is not waterproof. Please keep it dry and store in a shady and cool place.
End User’s mishandling, misuse, negligence, or im- proper installation, disassembly, storage, servicing or operation of the Product. iv. Modifications or repairs not made by ZAIN or a ZAIN-certified individual. Power failures, surges, fire, flood, accidents, actions of third parties or other events outside ZAIN’s rea- sonable control.
Limitation of Liability Zain shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, whether or not ZAIN had been advised, knew or should have...
• You need install the software. Run the Can not estab- installation program in path of My Com- lish the USB puter >SPEED 4G Mifi connection • If the driver of your device is abnormal, between your please reinstall the software. You need device and PC uninstall the software first.
Page 14
• Make sure your SIM card is available. The client con- • Change the location to find a place with nected to the good signal. device can not • Check WAN Connection mode setting. access the In- • Contact with your service provider and ternet confirm your APN settings.